Networked Digital Audio Systems & Snakes

A 96 kHz audio expander from Allen & Heath, the GX4816 provides high-input-count remote expansion for SQ and dLive* mixing systems (both sold separately). *Note: dLive compatibility due in Firmware V1.9 Every GX4816 comes loaded with 48 dL ...

The DX168 is a rugged, portable expander for adding remote I/O to a dLive S Class or dLive C Class system. Each DX168 features 16 mic preamps with independent Phantom Power LED indicators, plus 8 XLR line outs. Up to 6 DX168 units can be c ...

The Allen & Heath AB168 is a portable AudioRack, providing 16 XLR inputs and 8 XLR outputs when connected to a GLD-80 or GLD-112 mixer, or to an AR2412 AudioRack. Featuring 16 mic preamps with Phantom Power indicators and 8 XLR line outs, ...

The Allen & Heath AR22412 Remote Audio Rack is a 24 XLR input, 12 XLR output AudioRack. Adding an AR2412 to your Qu system lets you position some or all of your I/O over 390-feet (120m) from the Qu mixer, connected over a single Cat5 cable ...

This gigaACE networking card from Allen & Heath is the M-DL-GACE-A and is one of several audio networking options that can be fitted to an Allen & Heath dLive I/O Port. It provides a 128x128ch 96kHz gigaACE point-to-point link on Cat5e cab ...

Housed in a convenient stagebox, DT168 from Allen & Heath provides 16 microphone preamps and 8 line outputs. Constructed with rubber bumpers and a handle, it is ideal for portable applications. Deploy to any stage or use as a drop-in expan ...

The Allen & Heath AR84 is an 8 XLR input, 4 XLR output AudioRack. Adding an AR84 to your system lets you position some of your I/O over 390-feet (100m) from the mxer, connected over a single Cat5 cable running Allen & Heath’s dSNAKE prot ...

Allen & Heath DT-20-X 2-In Dante Expander with Power Supply The compact 48kHz/96kHz DT-20 Dante interface enables the convenient placement of two mic/line inputs wherever they are needed to get analog audio into a Dante network. It can be ...

The Allen & Heath DX164-W is a wall mountable expander that adds remote I/O to a dLive system.Each DX164-W features 16 mic preamps with independent Phantom Power LED indicators, plus 4 XLR line outs. Up to 6 DX164-W units can be connected t ...

Allen & Heath DT-02-X 2-Out Dante Expander with Power Supply The DT-02-X is a compact and affordable 48/96kHz Dante interface that provides two XLR outputs wherever they are needed on a Dante network. A perfect solution for a variety of fi ...

Compatible with the dLive product series, the GPIO from Allen & Heath is a general purpose I/O interface for control integration of a dLive system and third party hardware. GPIO offers 8 opto-coupled inputs and 8 relay outputs on Phoenix c ...

DX88 is a 96kHz digital audio expander, designed to facilitate the seamless integration of 8 microphone/line inputs and 8 line outputs into fixed installations. This is achieved through the utilization of standard Phoenix/Euroblock connect ...

Allen & Heath DT-22-M 2X2 Dante I/O Expander, No Power Supply The compact DT22 48kHz/96kHz Dante interface allows convenient placement of two mic/line inputs and two line-outputs wherever they are needed. Designed for fixed installations, ...

As a digital network audio receiver, the DiNET DAN-RX from Radial Engineering is capable of converting 2 channels of digital audio to analog, allowing routing to any location from a Dante compliant network. It features balanced XLR outputs ...

It's easy to transmit 2 channels of high-quality analog audio over either a Dante or an AES67-compliant network using Radial Engineering's DiNET DAN-TX2. It features multiple input options, with balanced XLR/TRS connectors for use with pro ...

A road-worthy digital network audio receiver, the DiNET DAN-RX2 from Radial Engineering is capable of converting 2 channels of digital audio to analog, allowing routing to any location from a Dante or AES67 compliant network. It features b ...

A versatile wall-mount design for permanent installation, the DT164-W Dante I/O Expander from Allen & Heath provides 16 microphone preamps and 4 line outputs. Mount via in-wall or on-wall with the reversible mounting frame, or fit in a sta ...

Allen & Heath DT-02-M 2-Out Dante Expender, No Power Supply The DT-02-M is a compact and affordable 48/96kHz Dante interface that provides two XLR outputs wherever they are needed on a Dante network. A perfect solution for a variety of fix ...

Allen & Heath DT-20-M 2-In Dante Expander, No Power Supply The compact 48kHz/96kHz DT-20 Dante interface enables the convenient placement of two mic/line inputs wherever they are needed to get analog audio into a Dante network. It can be u ...

The DX88 is a high-performance 96kHz digital audio expander engineered to streamline the integration of 8 microphone/line inputs and 8 line outputs within fixed installations. This integration is achieved through the utilization of standar ...

The DX164-W is a wall or floor mount expander from Allen & Heath that is built for adding extra inputs & outputs to a dLive or SQ system. The DX164-W features 16 high end, low noise microphone preamps with independent phantom power LED ind ...

Complimenting the dLive Series of products from Allen & Heath is the DX32 Modular I/O Expander. This DX Expander allows you to add remote, modular I/O to a dLive system. It provides 4x 8ch slots to fit a selection of analog or digital I/O. ...

If you need to get more out of your system, just look to the Allen & Heath DX012. It's designed to provide remote output expansion for their SQ and dLive models. It's ideal for feeding IEM systems as well as amplifier racks, offering both ...

With its ultra-flat frequency response and lightning-fast slew rate, the DX32 Prime input module faithfully captures every detail of your source with clarity and precision. The DX32 connects via a single Cat5e cable and brings 8 channels o ...