LED Tape / Pixel Drivers & Control

This member of City Theatrical's QolorFLEX™ Dimmer offerings, the QolorFLEX™ 5x8A Dimmer (Part # 5809) can control a full 40A of LED tape spread over five output channels of 8A each. The QolorFLEX 5x8A Dimmer is designed to operate per ...

The ENTTEC PLink Injector (part no. 73544) converts Plink data from ENTTEC's Pixelator or Pixelator Mini, allowing you to easily control pixel tape or pixel dots from long distances. 12V-24V power is re-injected from an external power sour ...

Rosco's RoscoLED Control Box VariWhite/400W/24V provides 24 volt power to RoscoLED VariWhite LED Tape and interfaces with a DMX console for flicker-free dimming and color-temperature control. Rosco RoscoLED Control Box VariWhite Specificat ...

Flex Pixel 5VPSU (FLE781) is a 5volt, 5amp (120-240v) power supply required for each section of Flex Pixel WP LED Tape from Elation. Use with the Flex Pixel Driver (FLE768) and the Flex Pixel IR (FLE755), both sold separately. This power s ...

This RoscoLED Variable PWM DMX Decoder 5 x 8A (Item Code: 293222610001) gives you control for vibrant, versatile lighting effects. This model is designed for the most demanding lighting applications, and offers both DMX and Stand-Alone Mod ...

FLEX LED PSU4A™ is a UL® listed multi-voltage auto switching external power supply for use with Elation’s FLEX LED Tape Series. This 12 V, 4 A power supply features a standard 0.22" (5.5 mm) DC barrel connector on one end, and a stand ...

The ENTTEC PLink Injector (part no. 73546) converts Plink data from ENTTEC's Pixelator or Pixelator Mini, allowing you to easily control pixel tape or pixel dots from long distances. 5V power is re-injected from an external power source.

The Chauvet Professional Épix Drive 900 hosts the processing and power supply for the Épix Tour system. With a total capacity of 900 LEDs, it supports either 18 Epix Strip Tours or 6 Épix Bar Tours, or any combination of the two. This p ...

Komply™ DMX is a 4-channel DMX512 decoder that can control up to 4 different 12V LED ribbon products or any one RGB(W) LED strip. It can run in stand-alone mode via the DIP switches or under DMX512 control using XLR or RJ45 DMX512 Input/ ...

FLEX RGBC+ is a control box intended for use with the infrared wireless controller system for Elation's FLEX RGB Tape.

The Flex Pixel Driver (FLE768) from Elation is a dedicated DMX driver for up to 144 Pixels / 2 Tapes / up to 432 dmx channels of control. It’s small, compact design allows for easy mounting and integration into your Flex Pixel LED Tape i ...

Flex Pixel IR Infrared Wireless Receiver and Remote driver allows for stand alone control of Flex Pixel WP LED Tape from Elation (sold separately).

The ADJ LED Pixel 4C is a 4-Channel Driver/Controller for the LED Pixel Tube 360 (not included). This fixture can be used in a stand alone mode or connected in a Primary/Secondary configuration. This controller has five operating modes: So ...

Rosco's RoscoLED Control Box Static White/300W/24V provides 24 volt power to RoscoLED Static White LED Tape and interfaces with a DMX console for flicker-free dimming. Rosco RoscoLED Control Box Static White Specifications: 5PXLR, RJ45 DMX ...

Rosco's RoscoLED Control Box VariColor/400W/24V provides 24 volt power to RoscoLED VariColor LED Tape and interfaces with a DMX console for flicker-free dimming and color-temperature control. Rosco RoscoLED Control Box VariColor Specificat ...

Rosco Laboratories' RoscoLED Power Supply is a 350W switching power supply that accepts 100-240VAC input and provides 24VDC power to RoscoLED Tape. Onboard over-temperature and over-load/over-voltage protection ensure smooth, safe operatio ...

Give your Komply™ LED ribbon project the boost it needs with Blizzard's Komply Amp. Ideal for when the total length of a project has maxed out the power of your LED driver, this unit is designed to receive and amplify the PWM (pulse widt ...

Designed for use with their Komply™ RGB LED ribbon products, Blizzard's Komply Remote is an advanced RGB controller and RF remote. It comes packed with 60 static color presets, plus multicolor fade/jump auto programs with speed control. ...

The LED Pixel 10C by ADJ is a 10-Channel Controller for the LED Pixel Tube 360. With 24 built in programs and sound activation, this is the number one tool for any musician or DJ looking to take control of their lighting. For even larger d ...

Coming Soon! The ÉPIX Flex Boost is a 24V in-line voltage booster that doubles the capacity of each output on the ÉPIX Flex Drive and the quantity of ÉPIX Flex 20 it controls. There is no need to solder into your system with this plug-a ...

Blizzard's Komply Knob 3 has three rotary knobs, providing the ability to manually adjust the desired color and brightness by independently controlling the intensity levels of the red, green, and blue channels of Komply RGB LED strips. Thi ...

RoscoLED ARC VariWhite Ctrl Box Rosco 293222600001 Specifications: Input Voltage: 90VAC ~ 264VAC via Neutrik Powercon connector Output Voltage: 24VDC via three, 3-pin connectors Rated Power: 400W DMX: 5-Pin XLR In – RJ45 In/Out Operating ...