Rolls Microphones, DI, Pickups

The Rolls DB14b is a special purpose direct box for applications where a stereo source signal can be separated, and individual volume controls used for each track such as an AV presentation from a laptop computer, or a rehearsing choir to ...

The Rolls PB23 is for powering phantom powered microphones with either 12VDC or 48VDC. Since the unit uses a 100kHz switching power supply, there is no audio noise generated. It has output pull down resistors so it will work with any mixer ...

The MM11 Pro MicMute is a simple device designed to temporarily mute or talk a balanced XLR signal. Very similar to the MM11, but the \"PRO\" version has push to talk or push to mute switch that allows to unit to do just that. The MM11 Pro ...

Perfect for any condenser microphone, the new PB224 powers even the high-current draw microphones. The unit features a complete redesign in the voltage supply circuits, offering a rock solid 48 volts of clean phantom power. The 224 now spo ...

The Rolls RPB486 Phantom Hex powers up to 6 condenser microphones with 48 volts of ultra clean phantom power. The outputs are XLR balanced for easy connection to a digital multi-track recorder. To eliminate the possibility of any DC voltag ...

The MS111 is a general-purpose muting switch for microphones and will pass phantom power. It is configurable to be Push to Mute, Release to Mute, Push ON and Push OFF maintained contact. It is the only switch of this kind we know of and is ...

The PB223 is for powering phantom powered microphones with either 12VDC or 48VDC. Since it uses a 100kHz swithcing power supply, there is no audio noise generated. It has output pull down resistors so it will work with any mixer, and has 2 ...

The Rolls DB228 Wall Direct Interface is an impedance matching device for unbalanced stereo signals to be connected into a balanced system. Quickly connect a variety of consumer audio equipment such as CD players, DVD players, MP3 players, ...