Product Overview
Take the mystery and hassle out of remote wireless connection with the EasyLink bridge complete kit kit. The pre-configured multi- point bridge kit comes with four EasyLink bridge clients, one base unit, power supplies, POE injectors, and mounting accessories. Installation is as easy as mounting, powering up, and aligning via the integrated LEDs. The unit can be pole, wall, or structure mounted and is outdoor rated for use in rain, snow, and winds up to 125mph at distances up to 2 miles apart. All of your communications are secure thanks to WPA2 security and a 20-digit passphrase, ensuring your information stays confidential. Easy, secure, reliable. The EasyLink 300 bridge kit.
EtherWAN EASYLINK-300-US-MP04 Includes:
- 4 x paired Wireless Bridge Clients and
- 1 x Wireless Bridge Base unit,
- 5 x 24VDC, 1.5A Power Supplies,
- 5 x Passive PoE Injectors and 5 x Mounting kits
EtherWAN EASYLINK-300-US-MP04 Features:
- Preconfigured kits for hassle-free setup
- Power and align using supplied PoE injectors and power supplies
- Protected with WPA2 Security and a 20-digit passphrase
- Protected against rain, snow and winds up to 125mph, IP67 ingress rating
- Wide operating temperature range (-40° to 167°F)
- Wireless connectivity up to 2 miles apart
- Includes power supplies and mounting hardware
EtherWAN EASYLINK-300-US-MP04 Specifications:
- Wireless Frequency: 5 GHz
- Max data rate: 300 Mbit/s
- Number of chains: 2
- Standards: 802.11a/n
- WPA2 Passphrase
- 256-bit AES-CCM Encryption
- Dynamic Frequency selection
- Layer 2 Features
- Auto-negotiation for port speed and duplex
- Redundant Protocols (always enabled)
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
- Interface
- Ethernet
- Primary Node: 10/100/1000BASE-T Passive PoE
- Auxiliary Node: 10/100/1000BASE-T
- Wireless: 802.11a/n
- Technology Standards
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-T
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3x full duplex and flow control
- IEEE 802.1D STP
- IEEE 802.1s MSTP
- IEEE 802.1w RSTP
- IEEE 802.11w Management Frame Protection (MFP)
- Power
- Primary Node
- PoE in (Active PoE 802.3at/bt)
- Max power consumption 17W
- Auxiliary Node
- PoE in (Passive PoE)
- PoE in input Voltage 6-30V
- Max power consumption 11W
- Physical, Primary Node
- Dimensions
- 270 x 565 x 76mm (W x H x D)
- 10.63” x 22.25” x 3”
- Weight (shipping): 6.2lbs (2.81kg)
- Installation Type: Pole/Wall
- Casing Material: UV Protected Polystyrene case
- Auxiliary Node Dimensions
- 185 x 185 x 63.5mm (W x H x D)
- 7.28” x 7.28” x 2.5”
- Weight (shipping): 2 units per box: 7.15lbs (3.25kg)
- Installation Type: Pole/Wall
- Casing Material: UV Protected Polystyrene case
- Environmental
- Operating Temp.: -40 to 75°C (-40 to 167°F)
- Storage Temp.: -45 to 85°C (-49 to 185°F)
- Relative Humidity: 5% to 95% (non-condensing)
- Wind Survivability: 200km/h
- *Power supply rated 5°F to 158°F
- Regulatory
- ISO: Manufactured in ISO-9001 facility
- EMI: FCC Part 15B Class A PCC Part 15C
- Environmental Test Compliance
- IEC 60068-2-6 Fc (Vibration Resistance)
- EN 61000-4-3 (Radiated RFI)
