Biamp Desono C-IC6LP-B 2-Way 6.5" Low Profile Passive Ceiling Loudspeaker

The Desono C-IC6LP presents an optimal solution for conferencing spaces requiring superior speech reproduction in narrow-depth ceilings. With a compact 3.9-inch depth, it outperforms competitors in addressing spatial constraints. The genuine coaxial driver set minimizes distortion, and the integrated HF waveguide ensures wide, consistent coverage. Swift installation is complemented by seamless integration with the Tesira AMP-450BP, reducing wiring complexities. Certified for use with Zoom software, the C-IC6LP combines technical prowess with efficient design, making it an ideal choice for advanced conferencing audio needs.

Biamp DESONO-C-IC6LP-B Features:

• Exceptional Intelligibility with Consistent Uniform Coverage
• Coaxial Configuration with Acoustically-Aligned, Wide Dispersion Soft Dome Tweeter and Waveguide
• Seamless Integration with the Tesira AMP-450BP
• Stylish Edgeless Magnetic Grille Design for Aesthetic Appeal
• Input Cover Features Conduit Knock-Outs Compliant with Chicago Plenum Air Space Requirements
• Black Finish

Biamp DESONO-C-IC6LP-B Specifications:

• Operating Mode: Passive with DSP
• Operating Environment: Indoor
• Operating Range (-10dB): 63 Hz to 20 kHz
• Nominal Beamwidth (H x V): 145° conical
• Transducers:
  • LF: 1 x 6.5" treated paper cone
  • HF: 1 x 1.0" treated soft dome driver with waveguide
• Sensitivity: 87 dB (2.83 V), 87 dB (1 W at 8 Ω)
• Nominal Continuous Power Handling (Passive): 22 V (60 W @ 8 Ω)
• Nominal Maximum SPL (Passive):
  • Peak: 109 dB
  • Continuous: 103 dB
• Rated Continuous Voltage (Passive): 21.9 V (27 dBV)
• Rated Maximum SPL (Processed):
  • Peak: 115 dB
  • Continuous: 103 dB
• Recommended Amplifiers: 60 W - 120 W into 8 Ω (22 V - 31 V)
• Crossover Frequency: 2.5 kHz
• Required Accessory: 65 Hz, 18 dB/oct. high pass filter; DSP preset for ALC or Tesira
• Input Connection: 4-position Euroblock connector, 2 RJ45 ports
• Controls: None
• Mounting Provisions: 3 SpringLock™ mounting clamps with 33 mm (1.3") grip range
• Dimensions (W x D): 341 mm x 101 mm (13.41" x 3.96")
• Weight: 4.12 kg (9.1 lbs)
• Finish: Refer to the Technical Drawing (page 3)
• Accessories (included):
  • C-Ring supporting plate
  • Tile support bridge rails
  • Grilles
  • Paint masks
  • Cut-out template
  • Wire strain-relief fittings