Apogee Electronics SYM2-2X6SE-PTHD-PLUS Audio Interface with Pro Tools HDX, 2X6 Analog I/O

Your Symphony, your way. The Symphony I/O MKII 2X6SE PTHD Plus provides an elegant solution to running your Pro Tools | HD over-IP system (sold separately). The SSYM2-2X6SE-PTHD-PLUS features a 2-in / 6-out analog card with AES, optical, and SPDIF digital inputs and outputs configured for direct connection to your Pro Tools HD card or chasis (sold separately). Symphony is fully controllable using the front panel touchscreen. The high-resolution TFT display also delivers the visual feedback you need while tracking and mixing. Control inputs and levels, meter all active channels (up to 32 x 32), their levels, polarity, phantom power, and more without looking at your computer. Of course, if you want to use your big screen and PC to monitor, configure, and control your session, Symphony Control software for mac OS provides access to the features and functions of your SSYM2-2X6SE-PTHD-PLUS. If you're mixing for Dolby Atmos and other immersive formats, your Symphony I/O MKII supports Apogee's Monitor Workflows. AMW allows you to effortlessly configure and operate your system for Dolby Atmos, Sony 360 Reality Audio, and other immersive formats with control of up to 32 Speaker outputs. You can also use Apogee Control (sold separately) for remote hardware control of your Symphony as well as via your mobile device running iOS. Don't have computer access? No worries. Symphony's standalone routing capabilities and onboard touchscreen let you set up and control all aspects of your system sans computer. You can even integrate Symphony into existing systems to quickly expand their capability, whether it's for studio or live applications.

Apogee Electronics SYM2-2X6SE-PTHD-PLUS Includes:

• Symphony I/O Mk II Interface
• Power Cable
• Quick Start Guide
• Warranty Booklet

Apogee Electronics SYM2-2X6SE-PTHD-PLUS Features:

• Best performance of any multi-channel Pro Tools HD interface
• Best cost per channel value of any Pro Tools HD interface solution
• Connects directly to any Pro Tools HD system (Mac or PC)
• Emulates Avid HD I/O interface, including sample-accurate delay compensation
• Connect multiple units in a single system (1 unit per HD port)
• Easy I/O calibration with front panel touchscreen

Apogee Electronics SYM2-2X6SE-PTHD-PLUS Specifications:

• Inputs
  • Analog IN: 2 balanced inputs on 2 female XLR connectors
  • AES IN: Stereo input on 1 female XLR connector
  • Optical IN: Supports ADAT, SMUX & S/PDIF
    • ADAT: 8 channels 44.1-48 kHz on 1 Toslink connector
    • SMUX: 4 channels 88.2-96 kHz on 1 Toslink connector
    • S/PDIF: 2 channels, up to 96 kHz on 1 Toslink connector
  • S/PDIF Coax IN: 2 channels, up to 192 kHz on 1 RCA connector
• A/D
  • THD+N of -116dB @23dBu (0.00016%) unweighted
  • Dynamic range: 124 dB (A) of dynamic range
  • Maximum input levels:
    • +4dB setting: +24dBu
    • -10dB setting: +6dBV
  • Frequency response at 44.1kHz: 1-20,000 Hz (+/- 0.05dB)
  • Input impedance: 10K
• Outputs
  • Analog OUT: 6 balanced outputs on 1 DSUB 25-pin connector
  • AES OUT: Stereo output on 1 male XLR connector
  • Optical OUT: Supports ADAT, SMUX & S/PDIF
    • ADAT: 8 channels 44.1-48 kHz on 1 Toslink connector
    • SMUX: 4 channels 88.2-96 kHz on 1 Toslink connector
    • S/PDIF: 2 channels, up to 96 kHz on 1 Toslink connector
  • S/PDIF Coax OUT: 2 channels, up to 192 kHz on 1 RCA connector
• D/A
  • THD+N of -118dB @ 22dBu (0.00013%) unweighted
  • Dynamic range: 131dB (A) dynamic range
  • Max output levels – ∞ to +24dBu
  • Frequency response at 44.1 kHz: dc to 20kHz (+/- 0.05dB)
  • Output impedance: 25 Ohm
• Connection: Pro Tools | HD
• Performance: 44.1kHz – 192kHz
• Compatibility: macOS or Windows
• Control: Front panel touchscreen