Product Overview
The KP-4016 keypanel utilize Bosch's OMNEO technology with Dante by Audinate for high-quality digital audio transmission over IP, supporting both copper and fiber connectivity. These keypanels offer superior audio performance, eliminating noise, delay, and artifacts commonly found in older technologies. They feature a comprehensive set of connectors, including GPIO and RC, as standard. Backward compatibility with previous matrix generations, including analog technology, is a key focus. The keypanel models incorporate the latest wide-angle TFT displays, delivering exceptional clarity, resolution, and extended display lifespan for optimal readability in various lighting environments.
RTS Features:
- OMNEO Open Media Networking Standard
- Full IP Connectivity and TCP-IP Layer 2 & 3 Compatibility
- Advanced Signal Processing and AD/DA
- User-Friendly, High-Res Color Display
- Backward compatibility
- Enhanced navigation menus
- Front panel headset connector
RTS Specifications:
- LCD Display:
- Active Area: 120.10 mm (wide) x 18.77 mm (high)
- Dot Resolution: 576 x 90 pixels
- Color Resolution: 16-bit (64 K) RGB color
- View Angle: 80 degrees (typical; all directions)
- Power Supply:
- Type: External DC
- AC Input: 100–240 VAC 50/60 Hz
- General Purpose Inputs and Outputs:
- Outputs:
- Type (relays): SPDT
- Contact Rating: 1 AMP @ 30 VDC
- Inputs:
- Type: Optically Coupled
- Input Voltage: 5-18 VDC on A+, * A+ is internally pulled to 5VDC. Connect K- to to activate.
- Inputs:
- Matrix:
- Type: Balanced
- Typical Input Level: + 8 dBu
- Typical Input Impedance: > 10 k Ω
- Maximum Input Level: + 20 dBu
- Supported Bandwidth: 100 Hz to 20 KHz
- Aux 1 and Aux 2:
- Type: Balanced
- Typical Input Level: + 8 dBu
- Typical Input Impedance: > 10 k Ω
- Front Panel Mic:
- Type: Electret
- Typical Input Level: - 42 dBu
- Typical Input Impedance: 1 k Ω
- Maximum Input Level: -25 dBu
- Rear Panel Mic:
- Type: Electret
- Typical Input Level: -42 dBu
- Typical Input Impedance: 1 k Ω
- Maximum Input Level: -25 dBu
- Front and Rear Headset Mic: - Electret
- Typical Input Level: -42 dBu
- Typical Input Impedance: 1 k Ω
- Maximum Input Level: -25 dBu
- Front and Rear Headset Mic: - Dynamic
- Typical Input Level: -50 dBu
- Typical Input Impedance: 600 Ω
- Maximum Input Level: -25 dBu
- Outputs:
- Matrix:
- Type: Balanced
- Typical Output Level: +8 dBu
- THD+N%: < 0.20 %
- Typical Output Impedance: 600 Ω
- Maximum Output Level: +20 dBu
- Frequency Response: 100 Hz to 20 KHz
- MIC/LINE Out:
- Type: Balanced
- Typical Output Level: +8 dBu
- THD+N%:
- Typical Output Impedance: 600 Ω
- Maximum Output Level: +20 dBu
- Frequency Response: 100 Hz to 20 KHz
- Headset: - Front, Rear, Left, Right
- Maximum:
- Output Power: 125 mW for 32 Ω load
- Earphone Impedance: 16 Ω and above
- THD+N%: < 0.20 %
- Frequency Response: 100 Hz to 20 KHz
- Speaker: - Rear
- Maximum Output Power: 5 W for 8 Ω load
- Speaker Impedance: 4 Ω and 8 Ω
- THD+N%: < 0.20 %
- Frequency Response: 100 Hz to 20 KHz
- Speaker: - Front
- Front: 84 dBSPL for 1 kHz sine wave @ 1 meter
- Digital:
- OMNEO Channels:
- Typical OMNEO Latency: 1 ms
- Frequency Response: 20 Hz - 20 KHz
- Environmental:
- Dimensions: 17.39” W (without rack ears) x 1.72” H x 3.88” D (441.82 mm x 43.8 mm x 98.5 mm [111.11 mm including volume knobs and lever keys])
- Weight: KP-4016: 3.5 lb (1.58 kg), Power Supply: 0.53 lb (.24 kg)
- Power Supply:
- Mounting Bracket: 0.30 lbs (.14 kg)
- Temperature:
- Operating: 0 °C to 55 °C (32 °F to 131 °F)
- Storage: -20°C to 70 °C (-4 °F to 158 °F)
- Power Consumption: Nominal: 12 Watts, Maximum: 15 Watts, Maximum Volt Amp: 48 VA
- Certification: CE Compliance, UL Certified
