Crestron AMP-X50MP X Series Media Presentation Amplifier, 50W

A streamlined and effective stereo amplifier designed for media presentation systems.

Crestron AMP-X50MP Features:

• Compact and versatile power amplifier
• 2 x 25 W per channel (1 x 50 W) into 4 or 8 Ohm speakers
• 1 x 50 W output for Hi-Z (70V and 100V) speakers
• Balanced, unbalanced, and stereo 3.5 mm inputs with auto summing
• Stereo or mono-summed operation
• Remote power control
• Energy saving design reduces power consumption when idle
• Highly sensitive audio-sensing circuitry with high-speed wake time
• Convection cooled for noiseless operation
• Volume, bass, and treble adjustments
• Knob cover protects accidental changes to the device settings
• Captive speaker and power connectors for secure and robust connectivity
• Electronic short-circuit and overload protection
• Factory installed surface mount flange brackets are removable and reversible
• Quarter-Rack width for rack mounting with optional kit
• 60 W DC power supply with locking barrel connector and DC cable included

Crestron AMP-X50MP Specifications:

• Audio:
  • Input Signal Types: Balanced or unbalanced analog line-level
  • Frequency Response: LoZ (4-8 Ohms): 20 Hz to 20kHz
    • +/-0.5 dB at 1 W; Hi-Z (70V/100V): 90 Hz to 20kHz
    • +/-3 dB at 1 W; HPF @ 80 Hz (+/-10 Hz), -12 dB/Octave
  • THD+N: < 0.1 % at 1kHz @ -3 dB full rated output power
  • S/N Ratio: > 90 dBA, 20 Hz to 20kHz, balanced, Hi-Z
  • Crosstalk: -75 dB at 1 kHz
  • Input Sensitivity: 1.23Vrms, +4 dBu balanced; 0.316Vrms, -10 dBV unbalanced;
    • For 25 W @ 8 Ohms
    • 50 W @ 70V/100V
  • Gain: 21.5 dB @ 8 Ohms, Balanced
  • Wake Signal Threshold: -57 dBu (1 mV) max
  • Protection: Clip limiter, over current, under voltage, over temperature, DC offset, extreme high frequency
• Connectors:
  • Speaker Output: (1) 6-pin, 5.08 mm pitch, 12A plug with screw locking retainers; Power amplifier outputs; Wire Size: Terminals accept up to 12AWG (3.31 mm2)
  • ALS OUT: (1) 3.5 mm connector, female; Unbalanced line level audio outputs; Maximum Output Level: 2.24Vrms, +7 dBV (+9.2 dBu); Fixed audio output for assisted listening devices duplicates the summed audio input
  • AUDIO IN 1-2 (unbalanced): (2) RCA connectors, female; Unbalanced line level audio inputs; Maximum Input Level: 2.24Vrms, +7 dBV (+9.2 dBu)
  • AUDIO IN 1-2 (unbalanced): (1) 3.5 mm connector, female; Unbalanced line level audio inputs; Maximum Input Level: 2.24Vrms, +7 dBV (+9.2 dBu)
  • AUDIO IN 1-2 (balanced): (1) 5 pin 3.5 mm detachable terminal block; Balanced line level audio inputs;
  • Maximum Input Level: 7.75Vrms, +20 dBu; Input Impedance: 20k Ohms
  • REMOTE: (1) 2 pin 3.5 mm detachable terminal block; Connect to contact closure to place amplifier in standby mode.
  • G: (1) M3 with captivated internal tooth lock washer screw; Chassis ground lug
  • 24V, 2.5A: (1) External 60 W desktop power supply (24VDC/2.5A); Mates with locking barrel connector DC cord; Power supply included.
• Controls & Indicators:
  • PWR: (1) Bi-color white/red LED; White indicates operating power supplied; Red indicates standby mode.
  • FAULT: (1) Red LED; Indicates an over temperature or over current fault
  • SIGNAL: (1) Bi-color white/red LED; White indicates input signal presence; Red indicates input signal clipping/limiting
  • Hi-Z: (1) White LED; Indicates speaker output is in Hi-Z (70V/100V) mode
  • MONO/STEREO: (1) Slide switch to select STEREO, MONO; STEREO preserves channels; MONO creates a mono downmix of the input signals
  • Hi-Z/LoZ: (1) Slide switch to select LoZ (low impedance 4-8 ohms) or Hi-Z (high impedance 70V/100V)
  • VOLUME, BASS, TREBLE: (3) Rotary knobs adjust volume, bass (+/- 6 dB), and treble (+/- 6 dB) levels
• Power:
  • Main Power: 24VDC, 2.5A; 100-240VAC, 50/60 Hz, 1.5A power supply included
  • Power Consumption: 14.6 W, 2 channels driven at 1/8th output power (4 ohms);
  • 6 W, idle (Hi-Z mode)
  • Temperature: 41° to 104°F (5° to 40°C)
  • Humidity: 10% to 90% RH (non‑condensing)
• Construction:
  • Chassis: Metal, convection cooled (fanless)
  • Front Panel: Metal, black finish with polycarbonate label overlay
  • Mounting:
    • Freestanding, surface mount, or 1/4 width 1 RU 19 in. rack mountable;
    • Gangable with other Crestron modular and X series products (adhesive feet and surface mounting brackets included);
    • Ganging kit and rack mounting kit optional
  • Knob Cover: Polycarbonate transparent material
• Dimensions:
  • Height: 1.74 in. (44 mm) without feet; 1.85 in. (47 mm) with surface kit
  • Width: 4.33 in. (110 mm); 5.58 in. (142 mm) with surface kit
  • Depth: 6.99 in. (178 mm) without knob cover; 7.57 in. (192 mm) with knob cover
• Weight:
  • 3.24 lb (1.5kg)
• Compliance:
  • ENERGY STAR, ErP (1275/2008/EC), UL 62368, FCC Class B commercial and residential use