Product Overview
The AVN-AI16R serves as an audio converter and interface, adept at transforming as many as sixteen analog inputs into the Dante Audio-over-IP network standard. It features two Ethernet ports, enabling it to run in a redundant mode for continuous audio routing, even if one network connection fails.
This affordable, 1U rack-mountable device provides an effortless solution for audiovisual professionals and system integrators. It is straightforward to set up and use, with configuration handled through the standard Dante Controller software, excluding line-up levels, and it is powered by PoE (Power Over Ethernet).
Sonifex AVN-AI16R Features:
- 16 x balanced analogue inputs on XLR.
- Adjustable global 0dBFS line up selection (+12dBu/+18dBu/+24dBu).
- 2 x RJ45 Dante connector (1Gb/s Ethernet Port) allowing the unit to operate in redundant or switched modes.
- PoE and Link LED status indicators for each Ethernet port.
- Clock LED status indicator.
- Configuration using Dante Controller.
- AES67 operation & Dante Domain Manager compliant.
- Powered by PoE on either (or both) Ethernet ports, offering power supply redundancy.
- 1U 19" rack-mount form factor.
Sonifex AVN-AI16R Specifications:
- Network and AoIP:
- AoIP Standard: Dante
- Number of Channels: 16 transmit
- Number of Streams: 16 transmit
- Sample Rate: 44.1kHz, 48 kHz, 88.2kHz, 96kHz, 176.4kHz or 192kHz
- Format: Linear PCM, 16, 24 or 32 bit
- AES67 Support: Yes
- Connectivity: 2 x RJ45
- Speed: 1Gbps and 100Mbps
- Network Modes: Switched or redundant
- Dante Domain Manager Ready: Yes
- Audio Input Performance Specifications:
- Input Impedance: >20kΩ balanced
- 0dBFS line-up: User Selectable +12dBu/+18dBu/+24dBu balanced
- Frequency Response: 20Hz to 20kHz, +0/-0.2dB
- THD+N: Less than -110dBFS, -30dBFS, 20Hz to 20kHz, 20kHz BW
- Noise: -110dBFS, 20kHz BW, Rs=200Ω
- Crosstalk: Less than -100 dB
- Common Mode Rejection: >60dB @ 1kHz
- Balanced Line Input XLR Pinout:
- Pin 1: Chassis Ground/Screen
- Pin 2: Input Phase/Positive
- Pin 3: Input Non-Phase/Negative
- PoE Power:
- Standard: 802.3af
- Class: 0
- PD Power Range: 0.44 W to 12.94 W
- Typical PSE Power Usage: 7 W
- Max PSE Power Usage: 15.4 W
- Equipment Type:
- AVN-AI16R: 16 Input Dual Dante® Interface, PoE
- Physical Specification:
- Dimensions (Raw): 48cm (W) x 11cm (D) x 4.3cm (H)(1U), 19” (W) x 4.3” (D) x 1.7” (H)
- Weight: Nett: 1.1kg Gross: 1.6kg, Nett: 2.4lbs Gross: 3.5lbs