Product Overview
Approach your complex installations with confidence. LD System's ZONE X 1208 DSP matrix processor offers a hybrid architecture with advanced routing options and the convenience of relevant presets and automated processes. Twelve balanced mic/line inputs with low-noise preamps and switchable 48V phantom power combine with eight balanced line outputs to provide the necessary flexibility for any enterprise audio application. The ZONE X 1208 offers the flexibility of analog audio I/O with local network control over Ethernet with the included Xilica Designer software (Mac/Windows), giving you an overview of all your connections and settings. An optional Ethernet + Dante card (sold separately) adds the capability of 64 x 64 channels of digital audio transmission and management to meet audio over IP needs. With an eye toward the future, the 1208 features a REMOTE bus connection designed for expansion using LD System's remote panels and paging microphones (sold separately) currently in the works. Whether you are looking to route or process multiple microphone or speaker groups in a church environment or build complex multi-room installations with calendar-managed routing, the ZONE X 1208 has you covered!
LD Systems ZONEX1208 Applications:
- House of worship
- Commercial enterprise audio systems
- Corporate enterprise audio systems
- Academic audio systems
LD Systems ZONEX1208 Features:
- DSP processor with hybrid architecture that allows users to adapt to different installation requirements via templates
- 40-bit floating point DSP engine with Analog Devices dual-core SHARC+ and ARM Cortex A5 processor
- New generation Linux operating system
- Premium microphone preamplifiers and high resolution 32 bit-AD/DA converters
- 12 balanced audio mic/line inputs with 48V phantom power selection per channel
- 8 balanced line outputs
- 8 GPI and 8 GPO logic ports
- REMOTE bus for integration of future remote panels and paging microphones from LD Systems
- Ethernet interface for remote control via the universal control software Xilica Designer; Ethernet + Dante card optionally available
- Integrated event scheduler
LD Systems ZONEX1208 Specifications:
- General data
- Audio inputs: 1 Remote Bus Audio input, 12 balanced Mic/line inputs
- Audio output: 8 balanced line outputs
- Logic inputs: 8 GPI - short to ground to activate
- Logic outputs: 8 GPO - LED (3mA) or Sink (300mA)
- Remote-Bus: Yes
- Connectors: 3-pin Terminal Block Pitch 3.81mm, Ethernet RJ45, I/O Connectors, Remote IN RJ45, Service Micro USB Type-B
- Indicators: Inputs 1 - 12 and outputs 1 - 8: signal indication white, Network, Power, Remote
- Controls Front panel: no
- Controls Element Back Panel: IP Reset, Power On/Off
- Expansion Slot: Ethernet + Dante- (ZONEX1208D), For Ethernet- (ZONEX1208)
- Cooling: Convection, passive
- Operating voltage: Wide Range SMPS
- Mains connector: 3-pole IEC mains connection (mains socket)
- Operating voltage: 90 – 240 V AC; 50/60 Hz
- Input fuse (mains): T2,5 A L / 250 V
- Inrush Current Power OFF-ON: 21 A
- Power Consumption @ idle mode: 23 W
- Max. Power consumption: 60 W W
- Operating temperature: 0°C - 40°C; < 60% humidity
- Width: 19“-Rack (483 mm)
- Height: 1 RU (44.5 mm)
- Depth: 315 mm (incl. terminal block connectors)
- Weight: 4 kg
- Performance specifications
- Nominal input sensitivity: -22 dBu (Sine 1 kHz, Gain max)
- Nominal input clipping: +20 dBu (Sine 1kHz)
- Distortion factor (THD+N): +13 dBu Signal,
- Intermodulation Distortion (SMPTE): < 0.01% (-10dB below clip) Analyzer BW 90kHz
- Frequency response: 15 Hz – 22 kHz (+/-0.15 dB)
- Input Impedance: Line 4k Ohms (balanced)
- Signal-to-noise ratio: >117 dB @ +20 dBu, Gain 0 dB, 20 kHz BW, A-weighted
- Dynamic range (DR AES17): 112 dB dB
- Crosstalk: 105 dB @ 10 kHz, 120 dB @ 1 kHz, 120 dB @ 100 Hz
- CMRR IEC: > 60 dB (1 kHz)
- Max. Gain: 42 dB
- Digital Specifications
- DSP: 40-bit floating point Analog Devices Dual-core SHARC+ processor
- System Latency:: 4.3 ms
- AD/DA converter resolution: 32 bit
- AD/DA converter sampling rate: 48 kHz
