Klover MiK 09 ACC Mik 09" Parabolic Collector with Accessory Mounting Bracket

The Mik 09 parabolic collector with mount gives field recordists and videographers a solid alternative to shotgun microphones. This accessory version comes with a mounting bracket that allows two flash shoe mounted devices to be attached to the base.

At just nine inches in diameter, the MiK 09 is small but mighty as it increases the range of your microphone by up to 50 feet in ideal conditions. The Mik 09 is ideal for on-location applications because it assures broadcast-quality capture while keeping you out of the shot, no boom required.

A natural for onsite news-gathering, the MiK 90 is lightweight, compact and it allows you to capture high-quality audio from a safe distance when required. The collector can be attached to a camera shoe, pistol grip, light pole, or even ceiling mounted to fit the application.

The MiK 09 is compatible with any omnidirectional lapel mic, meaning you can create a discrete, focused, long-range audio gathering rig with your current lapel mic, no shotgun required.

A microphone is not sold with the collector. An electronic pickup or microphone must be installed to capture audio.

Klover MiK 09 ACC Includes:

• Parabolic Dish
• Microphone Frame
• Microphone Mounting Rods
• Microphone Mounting Clips
• Accessory mounting block with 1/4-20 tapped hole and two cold shoe slots
• Cold shoe mount adapter
• Mounting rod for use with shotgun mic clamps

Klover MiK 09 ACC Features:

• Compatibility: Made For Universal
• Microphone Application: Broadcast Parabolic Collector

Klover MiK 09 ACC Specifications:

• Range: 30 to 50 feet in ideal conditions
• Amplification: Approximately 6 X
• Dimensions: 10 x 9 x 3 inches
• Dish Outside Diameter: 9 inches
• Collector Diameter: 8 inches
• Weight: Approximately 10 ounces
• Collector Dish Thickness: 1/8 inch
• Frequency: 40 Hz to 15 kHz
• Focus Point: 1-1/8 inch behind the inner face of aluminum frame
• Pickup Pattern: Approximately conical (15 degrees off center) (See “Test Results” tab below)
• Microphone: Omnidirectional lapel up to 5/16 inch diameter
• Mounting Options: Aluminum block with 1/4-20 tapped hole and flash shoe adapter is standard. The block can be replaced with the included cylindrical rod for mounting in a shotgun mic clamp