DPA 4288-DC-F-C34-LH 4288 Flex Headset Mic, 120 mm Boom, Brown, 3.5mm Mini-Jack

DPA's brown 4288 single-ear slim flex headset microphone is designed for use in stage or broadcast settings where minimal visual intrusion is preferred. Equipped with a 100mm flex boom arm, the 4288-DC-F-C34-LH model comes with a hardwired 3.5 mini jack for use with Sennheiser wireless systems.

Ergonomically designed, the 4288 has a comfortable fit and its directional pickup pattern focuses on the subject while rejecting sound from the back and sides for improved intelligibility. Designed for both spoken word and vocal performance, the 4288 exhibits extremely low distortion, a wide dynamic range, and the ability to handle up to 144 dB SPL (Sound Pressure Level).

DPA's reputation for crafting rugged microphones is legendary, and the 4188 is no exception. Covered by a 2-year warranty and carrying an IP58 dust and water ingress rating, the 4288 was built for performance, shying away from nothing to deliver precisely what you want to hear.

If you use multiple wireless systems from separate manufacturers, DPA's modular adapter system allows you to purchase (separately) the required adapters so you can quickly swap them out for ultimate flexibility.

DPA 4288-DC-F-C34-LH Applications:

• Theater
• Lecture
• House of worship
• Corporate presentations
• Vocal performance

DPA 4288-DC-F-C34-LH Features:

• Pristine audio quality
• Lightweight and flexible
• Easy mounting to the left or right
• Minimal visual impact
• Resistant to humidity
• Flexible adapter system fits most professional wireless systems

DPA 4288-DC-F-C34-LH Specifications:

• Directional pattern: Cardioid
• Principle of operation: Pressure gradient
• Cartridge type: Pre-polarized condenser
• Frequency response: 20 Hz - 20 kHz
• Effective frequency range, ±2 dB, Near field 2-3 cm (0.8 - 1.2 in): 100 Hz - 20 kHz (4 - 6 dB soft boost at 15 kHz)
• Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
• Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
• Distortion, THD < 1% - Legacy: 120 dB SPL RMS, 123 dB SPL peak
• Distortion, THD < 1% - CORE: 134 dB SPL RMS, 137 dB SPL peak
• Dynamic range - Legacy: Typ. 97 dB
• Dynamic range - CORE: Typ. 111 dB
• Max. SPL, THD 10%: 144 dB SPL peak
• Rated output impedance: 30 - 40 Ω
• Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
• Output balance principle: Signal balanced with DAD6001-BC XLR Adapter
• Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
• Power supply (for full performance): For wireless systems: Min. 5 V - max. 10 V through DPA adapter, With DAD6001-BC: P48 (Phantom Power). Will work from 12 V
• Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
• Connector: MicroDot, TA4F Mini-XLR, 3-pin LEMO, Mini-Jack
• Color: Brown
• Weight: Single Ear: 10 g (0.35 oz)
• Microphone diameter: 5.4 mm (0.21 in)
• Microphone length: 12.7 mm (0.5 in)
• Cable length: 1.3 m (4.3 ft)
• Cable color: Black, beige or brown
• Cable diameter: 1.6 mm (0.06 in)
• Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin
• Temperature range: -40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH): Up to 90%