Product Overview
Magewell USB-CAP-HDMI-PLUS USB Capture HDMI Plus
The USB Capture HDMI Plus is a one-channel 2K capture device for HDMI + embedded audio.
Magewell USB Capture HDMI Plus Includes:
- USB Capture HDMI Plus
- USB 3.0 Cable
- 3-year Warranty
Magewell USB Capture HDMI Plus Features:
- Multiple Devices on One Host
- Continuously Work for 24hx7
- High-speed Memory
- LED Status Indicator
- Windows, Linux and Mac SDK
Magewell USB Capture HDMI Plus Specifications:
- Supported OS
- Windows: Windows 7/8/8.1/10/Server 2008/Server 2008 R2/Server 2012/Server 2016 (x86 & x64)
- Linux (support x86, x64 & ARM architecture): Ubuntu 12.04/14.04/16.04/17.04/17.10/18.04 (x86 & x64)
- CentOS 6.5/7 (x86 & x64); Fedora 25/26/27 (x86 & x64); Red hat 6.5 and above (x86 & x64); Other Linux OS with kernel version 2.6.35 and above
- Mac: OS X 10.9/10.10/10.11; macOS 10.12 and above
- Chrome OS
- Recommended OS (tested):
- Windows: Windows 7 Ultimate/8.1 Enterprise/10 Enterprise/Server 2008 R2 DataCenter/Server 2012 R2; DataCenter/Server 2016 R2 DataCenter (x86 & x64)
- Linux: Ubuntu 12.04/14.04/16.04 (x86 & x64); Ubuntu 17.04/17.10/18.04 (x64); CentOS 6.5/7.2 (x86 & x64); Fedora 25/26 (x64); Red hat 6.5 (x86 & x64)
- Mac: OS X 10.9.5/10.10/10.11.2/10.11.3/10.11.4; macOS 10.12/10.13.2/10.13.3/10.14.3/10.15
- Supported APIs:
- Windows: DirectShow; Wave API/DirectSound/WASAPI
- Linux: V4L2; ALSA
- macOS: AVCaptureSession; AudioUnit
- Compatible Software:
- Zoom
- Skype
- Mircosoft Teams
- GoToMeeting
- Gstreamer
- VLC
- OBS Studio
- XSplit
- QuickTime Player
- Any other DirectShow/V4L2/AVCaptureSession based encoding or streaming software
- Input Interfaces:
- HDMI: DVI-D 1.0; HDMI 1.4
- 3.5mm audio jack: Microphone interface
- Host Interface
- USB 3.0: compatible with USB 2.0; compatible with USB 3.1 Gen 1
- Output Interface: 3.5mm audio jack (headphones interface)
- Loop-through Interface: HDMI (DVI-D 1.0, HDMI 1.4)
- Input features: Support for input video resolutions up to 4096x2160
- HDMI Specific Features:
- 297MHz HDMI receiver
- Adaptive HDMI equalizer support for cables lengths up to 30M
- Support for customized EDID
- Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
- Full colorimetry support
- Support for up to 4096x2160 4:4:4/4:2:2 30fps or 4096x2160 4:2:0 60fps input signals
- For 4:2:0 input signals, the horizontal and vertical resolution will be reduced to 1/2 for capturing
- For 4:4:4/4:2:2 input signal at more than 170MHz, the horizontal resolution will be reduced to 1/2 for capturing
- Support for 2 channel IEC60958 audio streams
- Support for extraction of audio formation information & channel status data
- Support for extraction of video timing information
- Support for extraction of 3D format information
- Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.
- Analog Audio Features:
- Extraction of stereo embedded HDMI audio for recording and output via 3.5mm stereo mini-jack headphones interface
- Capture of analog audio via 3.5 mm microphone interface
- Integrate the functions of a USB audio card. Playback audio via 3.5 mm headphones interface. Support for recording the playback audio of the computer.
- Video Capture format:
- Support for capture resolutions up to 2048x2160
- Support for capture frame rates up to 120fps (Actual capture frame rate can be limited by the USB bandwidth and
- internal working frequency. Typical capture frame rates on the Intel USB3.0 controller are as follows.)
- 1920x1080 YUY2 (up to 70fps)
- 1920x1080 RGB24 (up to 60fps)
- Support for YUY2 & UYVY 4:2:2 8-bit
- Support for RGB24 & RGB32 4:4:4 8-bit
- The default capture format is YUY2. More capture formats can be set using USB Capture Utility.
- Video Processing Features:
- Video processing pipelines with 160 Mpixels/s processing bandwidth
- Video cropping
- Video scaling
- Video de-interlacing: Weave; Blend top & bottom field; Top field only; Bottom field only
- Video aspect ratio conversion
- Auto or manual selection of input aspect ratio
- Auto or manual selection of capture aspect ratio
- Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
- Video color format conversion
- Auto or manual selection of input color format & quantization range
- Auto or manual selection of capture color format, quantization range & saturation range
- Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
- Support for Limited or Full quantization range
- Support for Limited, Full & ‘Extended gamut’ saturation range
- Video frame rate conversion
- Vertical flip and mirror
- Multiple devices on one computer:
- Support for connecting multiple USB devices to one system
- Support for setting the device serial number as the device name shown in the system using USB Capture Utility
- SDK: The USB Capture SDK provide functions including signal status extraction, capture configuration and real-time audio & video capture, etc.
- Firmware Upgrade: Multiple devices in one system can be upgraded simultaneously
- LED Indicator:
- Pulsing slowly: input signal unlocked
- On: input signal locked
- Double blinks: memory failed or FPGA configuration failed
- Off: firmware corrupted
- Dimensions (LxWxH): 3.9" x 2.2" x 0.7" (98.1 x 56.8 x 17 mm)
- Power Consumption:
- 5V max current: 900mA
- Max power consumption: ~ 4.5 W
- Working Environment:
- Operating temperature: 0 to 50 deg C
- Storage temperature: -20 to 70 deg C
- Relative Humidity: 5% to 90% non-condensing
