Product Overview
ETC CSR-M Applications:
School theatres, cafetoriums, and gymnatoriums
Houses of worship
Theatres retrofitting to LED stage luminaires
Night clubs
Event lighting
Conference and exhibition centers
Hotel ballrooms
Anywhere you need to quickly and conveniently get power control and DMX to fixtures, hazers, or moving lights
ETC CSR-M Includes:
- ColorSource Relay Multiverse Receiver
- 2 dBi gain omnidirectional antenna
- Power cable
ETC CSR-M Features:
- CSR-M is compatible with the Multiverse SHoW Baby® right out of the box, just pair them and go
- CSR-D provides DMX/RDM in-and-thru on 5-pin XLR
- Input voltage: 90–250 V; 47–63 Hz
- Two-pole air-gap relay supports 208 V and Delta power applications
- Auto sequencing: randomized turn-on delay in each relay ensures that no two turn on at the same time across a system
- Zero-cross switching minimizes inrush draw
- Choice of relay mode:
- Auto Mode (default) - switches on when DMX/RDM signal is detected; switches off after signal is no longer detected
- DMX Mode - switches on when DMX address is at or above 50%; switches off below 50%
- RDM Mode - switches on via RDM command; switches off via RDM command or power cycle
- RDM configuration via software such as ETC Concert or Eos
- Three mounting options: pipe, fixture yoke, and wall mount
ETC CSR-M Specifications:
- Electrical
- Voltage range: 90–250 VAC; 47–63 Hz; supports 120/208 V and Delta power
- Input/output method: Neutrik powerCON at 45 degrees
- Max current: 16 A
- Isolation: 2,500 V RMS
- Quiescent power consumption: 0.65 W
- Relay
- Switching: 2-pole air gap, 16 A max
- Electrical endurance:
- Resistive 100,000 cycles @ 16 A, 250 V
- Inductive 100,00 cycles @ 6 A, 250 V
- Ballast 20,000 cycles @ 6 A, 250 V
- Electronic 20,000 cycles @ 13 A, 250 V
- Mechanical endurance: 1,000,000 cycles
- Control
- Input method: 5-Pin XLR In or Multiverse wireless
- Output method: 5-Pin XLR Out (not self-terminating)
- Protocols: DMX512A, RDM, City Theatrical SHoW DMX Neo® and Multiverse
- RDM configuration:
- RDM Enable
- DMX Address (default:512)
- Threshold (default: 50%)
- Auto-Off/Sleep Timer (default: 5 min)
- Max Turn On Delay (default: 2 s)
- Relay Mode (default: Auto)
- Wireless SHoW ID (default: 1=201)
- Identify
- Local control: Wireless ID selection
- Software update: Local USB port
- Environmental
- Ambient operating temp.: 0°–40°C (32°–104°F)
- Humidity: 5–95%, non-condensing
- Not rated for outdoor use
- Physical
- Materials: Molded textured black plastic with integral safety connection point
- Mounting options: Pipe, yoke, or wall; accessories required (not included)
- Cooling: Convection cooled
- IP rating: IP20
- Included Accessories
- Power cable
- 2 dBi gain omnidirectional antenna
- Warranty: 2 years
- Approved regulatory standards:
- Conforms to UL 508
- Certified to CSA C22.2 No. 14
- cETLus Listed
- CE Compliant