Attero Tech D16Mio 16x16 Channel Mic/Line I/O Dante/AES67 Interface, 1RU

Attero Tech D16MIO 16 x 16 Channel Mic/Line I/O Dante/AES67 Interface, 1RU

The Attero Tech Synapse D16Mio is an AES67-compliant, high-performance networked audio interface with Dante™ support. It is equipped with 16 channels of studio-grade mic preamps, each with support for +48V switchable phantom power and a switchable pad to accommodate line-level inputs. The inputs have up to 51dB of digitally controlled gain in 3dB steps, and the balanced line-level outputs can be digitally attenuated from 0 to -100dB.

Attero Tech D16MIO Includes:

• D16MIO 16 x 16 Channel Mic/Line I/O Dante/AES67 Interface

Attero Tech D16MIO Features:

• 16 studio-quality mic preamplifiers with line level capability
• 16 line level balanced outputs
• Front panel or network control of mic preamp gain, phantom power, mic/line input sensitivity, and output levels
• Dante™ with AES67 support
• 1RU form factor
• Available Q-SYS control plugin (no programming required)

Attero Tech D16MIO Specifications:

• Mic/Line Inputs:
  • Number of Channels: 16
  • Type: 3-pin de-pluggable terminal block
  • Max. Input Level: -43dBu (max mic gain), +24dBu (pad on- line mode)
• Analog Outputs:
  • Number of Channels: 16
  • Type: 3.8mm terminal blocks
  • Max. Output Level: +24dBu
  • Dynamic Range: >110dB
• Headphone Output:
  • Connector: 1/4-inch TRS jack
  • Load: 32 Ohm minimum
• Audio Networking:
  • Protocol Support: Dante™ with AES67 support
  • Channel Count: 16 Dante RX, 16 Dante TX
  • Ports: 2 x Gb Copper on RJ-45, 2 x Gb SFP
  • Sample Rates: 16/24-bit, 44.1/48/88.2/96kHz
• Dimensions (WxHxD): 19.00” x 1.75” x 12.50” (482.6 x 44.5 x 317.5 mm)
• Weight: 6 lbs. (2.72 kg)