Product Overview
The SLXD14D/TL47B-K Bundle includes the SLXD14D dual-channel receiver, 2 SLX-D® Bodypack Transmitters with G58 frequency, and the TwinPlex™ TL47 Subminiature Lavalier Microphone with MTQG Connector in black.
The SLXD14D Dual Wireless System delivers transparent, 24-bit digital audio and rock-solid RF performance for a wide range of applications. Operate up to 32 compatible systems per 44 MHz band with easy setup.
The TwinPlex™ TL47 can handle the most critical acoustic environments without distortion. Offering extensive solutions for any application.
Includes
- SLXD14D Dual-Channel Receiver
- SLXD1 Bodypack Transmitters
- TL47 Lavalier Microphone with MTQG Connector
- (3) Frequency Caps, Flat Response
- (2) Frequency Caps, Presence Response
Features
- SLX-D System
- Operate up to 32 compatible systems per 44 MHz band
- Transparent 24-bit digital audio
- Extended 20 Hz to 20 kHz frequency range
- 120 dB dynamic range
- Digital predictive switching diversity
- Operating range of 100 m (300 ft.)
- 44 MHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
- Easy pairing of transmitters and receivers over IR scan and sync
- Up to 8 hours from 2 AA batteries
- Ergonomic and durable plastic construction
- TL47 Lavalier Microphone
- Low self-noise and dynamic range for cleaner audio production
- Twice the surface area of other subminiature microphones for pristine, natural response and robust low-frequency response
- Improved off-axis consistency yields accurate reproduction regardless of vocal source position or movement
- Interchangeable sweat- and moisture-resistant frequency caps prevent sweat-outs due to an invisible syperhydrophobic nanoscopic coating
- Paintable 1.6 mm cable that is immune to memory effect and kinks
- Dual redundant ground in cable serves as secondary shield for longevity
Specifications
- SLX-D System
- RF
- RF Carrier Frequency Range: 470–937.5 MHz (varies by region)
- Working Range: 100 m (328 ft) (actual range depends on RF signal absorption, reflection and interference)
- Image Rejection: >70 dB, typical
- RF Sensitivity: −97 dBm at 10-5 BER
- AUDIO
- Latency: 3.2 ms
- High-Pass/Low Cut Filter: 150 Hz, –12 dB/octave (factory default is for the HPF to be off)
- Audio Frequency Response: 20 Hz–20 kHz (+1, −2 dB)
- Audio Dynamic Range, A-weighted, 20 Hz–20 kHz, typical: 118 dB @1% THD
- Total Harmonic Distortion:
- System Audio Polarity
- XLR: Positive pressure on microphone diaphragm produces positive voltage on pin 2 with respect to pin 3 of XLR output.
- TRS: Postive pressure on microphone diaphragm produces positive voltage on the tip of the 6.35 mm (1/4-inch) with respect to the ring of the 6.35 mm output.
- Mic Offset Range: 0 to 21 dB (in 3 dB steps)
- TEMPERATURE RANGE (Battery characteristics may limit this range)
- Operating Temperature Range 0 °F to 122 °F (−18 °C to 50 °C)
- Storage Temperature Range −20 °F to 165 °F (−29 °C to 74 °C)
- SLXD4 Digital Wireless Receiver
- RF INPUT
- Spurious Rejection: >75 dB Typical
- Connector Type: BNC
- Impedance: 50 Ω
- AUDIO OUTPUT
- Gain Adjustment Range: –18 to +42 dB in 1 dB steps
- Configuration
- 1/4" (6.35 mm): Balanced (Tip=audio +, Ring=audio –, Sleeve=ground)
- XLR: Balanced (1=ground, 2=audio +, 3=audio –)
- Impedance
- 1/4" (6.35 mm): 1.3 kΩ (670 Ω Unbalanced)
- XLR (line): 400 Ω (200 Ω Unbalanced)
- XLR (mic): 150 Ω
- Full Scale Output
- 1/4" (6.35 mm): +15 dBV differentially (+9 dBV single)
- XLR (LINE setting): +15 dBV
- XLR (MIC setting): –15 dBV
- Mic/Line Switch: 30 dB pad
- Phantom Power Protection
- 1/4" (6.35 mm): Yes
- XLR: Yes
- NETWORKING
- Network Interface: Single Port Ethernet 10/100 Mbps
- Network Addressing Capability: DHCP or Manual IP address
- Maximum Cable Length: 100 m (328 ft)
- Dimensions (H × W × D): 1.65 × 7.76 × 5.98 in (42 × 197 × 152 mm)
- Weight: 1.8 lb (816 g) without antennas
- Housing: Galvanized Steel
- Power Requirements: 15 VDC @ 600 mA (supplied by external power supply, tip positive)
- SLXD1 Digital Wireless Bodypack Transmitter
- AUDIO INPUT
- Connector: 4-Pin male mini connector (TA4M)
- Configuration: Unbalanced
- Impedance: 1 MΩ
- Maximum Input Level: 8.2 dBV (2.57 Vrms, 7.27 Vpp)
- Preamplifier Equivalent Input Noise (EIN): –118 dBV
- RF OUTPUT
- Antenna Type: 1/4 Wave
- Occupied Bandwidth:
- Modulation Type: Shure Propietary Digital
- Battery Type: Rechargeable Li-Ion or 1.5 V AA batteries
- Dimensions (H × W × D): 3.86 × 2.68 × 1.0 in (98 × 68 × 25.5 mm)
- Weight: 3.1 oz (89 g)
- Housing: PC/ABS
- Power: 1 mW/10 mW (varies by region)
- TL47 Lavalier Microphone
- Microphone Capsule: Dual-Diaphragm, Prepolarized Condenser
- Polar Pattern: Omnidirectional
- Frequency Response: 20 Hz to 20 kHz
- Sensitivity at 1 kHz: -45.0 dBV (5.62 mV)
- Self-Noise, A-Weighted, Equivalent Acoustical: 24.5 dB SPL-A
- Signal-To-Noise Ratio: 69.5 dB
- Output Clipping Level: 3.0 dBV,1 kHz at 1% THD, typical
- Maximum SPL: 142.0 dB SPL, 1 kHz at 1% THD, typical
- Dynamic Range: 117.5 dB, typical
- Microphone Current Draw: 120 to 240 µA, typical
- Bias Voltage, Recommended Operating Voltage: 5 VDC
- Housing: Molded ABS
- Polarity: Positive pressure at diaphragm leads to positive voltage with respect to ground
- Cable Diameter: 1.6 mm
- Cable Length: 66 in. (1.67 m)
- Microphone Length: 13.5 mm
- Microphone Diameter: 5.6 mm
- Net Weight with Cable: 12.0 g (0.42 oz.)