Product Overview
The XIO Stage 4x4 presents a way to cost-effectively expand the channel I/O of your Dante-enabled Symetrix DSP units. Equipped with 4 analog XLR mic/line inputs with phantom power and 4 line outputs, the Stage 4x4 displays no audible latency while delivering audio over a standard IT network.
The xIO Stage 4x4 is configurable with Symetrix Composer leaving No third-party software, archaic DIP switches, or complicated front panel menus to navigate. Each of the four XLR analog input's and output's parameters, along with bus assignments, are configured using Symetrix Composer open architecture software.
Symetrix XIO-STAGE-4X4 Includes:
Symetrix XIO-STAGE-4X4 Features:
- Audio input (A/D), output (D/A) expander for Symetrix systems that capitalizes on the surplus DSP of a Dante-enabled Symetrix DSP unit to bring overall system costs down.
- 4 mic/line inputs, including +48 VDC phantom power, and 4 line outputs with the industry leading performance specifications of Radius NX, Edge and Prism DSPs.
- Configured with Symetrix Composer. No third-party software, archaic DIP switches, or complicated front panel menus.
- Network audio expansion using Dante protocol over standard IT networks. Ultralow latency.
- Mounts in standard 8”x8”x4” electrical enclosure.
Symetrix XIO-STAGE-4X4 Specifications:
- Frequency Response: 20 Hz – 20 kHz, ± 0.5 dB.
- Channel Separation: > 110 dB @ 1 kHz, +24 dBu.
- Connectors: Female Neutrik metal body DL series XLR connectors.
- Number of Inputs: Four (4) switchable balanced mic or line level.
- Nominal Input Level: +4 dBu with 20 dB of headroom (digital).
- Maximum Input Level: +23 dBu (1% distortion).
- Mic pre-amp gain: 0, 12, 24, 44 or 54 dB switchable.
- Mic pre-amp EIN: < -125dB with 150 ohm source impedance.
- CMRR: > 76 dB @ 1 kHz, unity gain.
- Input impedance: 8k Ohms balanced, 4k Ohms unbalanced.
- Phantom power (per input): +48 VDC 10 mA maximum.
- Dynamic range: > 116 dB, A-weighted.
- THD + Noise: < -100 dB, unweighted; 1 kHz @ +16 dBu with 0 dB gain.
- ADC Latency: 0.30 mS. ANALOG OUTPUTS
- Frequency Response: 20 Hz – 20 kHz, ± 0.5 dB.
- Channel Separation: > 110 dB @ 1 kHz, +24 dBu.
- Connectors: Male Neutrik metal body DL series XLR connectors.
- Number of outputs: Four (4) balanced line level.
- Nominal output level: +4 dBu with 20 dB of headroom.
- Maximum output level: +24 dBu (+22.8 dBu into a 2k Ohm minimum load).
- Output impedance: 300 Ohms balanced, 150 Ohms unbalanced.
- Dynamic range: > 116 dB, A-weighted.
- THD + Noise: < -94 dB, unweighted; 1 kHz @ +20 dBu with 0 dB gain.
- DAC Latency: 0.60 mS.
- Sampling Rate: 48 kHz.
- Dante Cable: Standard CAT6, maximum device-to-device length = 100 meters.
- Latency: 1.92 mS (input to output, 1mS Dante latency).
- Space Required: Minimum requirement of 8”x8”x4” electrical enclosure.
- Electrical: PoE IEEE 802.3af Class 0, 10 Watts maximum. No line voltage switching required (100-250 VAC, 50-60 Hz).
- Certifications or Compliance: UL 60065, cUL 60065, IEC 60065, FCC 15.109, FCC 15.109(g), FCC 15.107, EN 55032, EN 55103-2, EN 61000-3-3, EN 61000-3-2, ICES-003, RoHS.
