Product Overview
Transparent 24-bit digital audio and Shure's legendary rock-solid RF performance define the SLXD14D/DL4-MTQG-G58 wireless system with DL4 Lavalier mic. Designed for a range of applications, from extended presentations to live performance, the SLXD14D/DL4-MTQG-G58 offers easy setup and optional rechargeability accessories providing an optimal wireless experience wherever you use it.
You'll get an SLXD4D dual-channel receiver, two SLXD1 bodypack transmitters, and two DL4 omnidirectional lavalier microphones. The DL4 mic carries an IP57 waterproof rating, making it perfect for all-weather use at amusement and water parks or outdoor music venues because the show must go on! Up to 32 compatible systems per 44 MHz band can be operated so the SLXD14D/DL4-MTQG-G58 is ideal as a core system for future expansion.
Includes
- SLXD4 Dual-Channel Receiver
- (2) SLXD1 Bodypack Transmitters
- (2) DL4 Omnidirectional Lavalier Microphones
- (4) AA batteries
- (2) 1/4 wave antennas
- (2) BNC cables
- (2) BNC bulkhead Adapters
- Zipper bag
- Rackmount kit
- Power supply
Features
- SLX-D System
- Transparent 24-bit digital audio
- Extended 20 Hz to 20 kHz frequency range (microphone dependent)
- 118 dB dynamic range
- Digital predictive switching diversity
- 44 MHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
- Easy pairing of transmitters and receivers over IR scan and sync
- Automatic channel scan
- Link multiple receivers for group scan and firmware updates via Ethernet port
- Compatible with Shure Wireless Workbench® control software
- Remote monitoring and control via ShurePlus™ Channels app
- Third-party setup and control via Ethernet
- Elegant and easy-to-use interface with high-contrast LCD menu
- Guided setup mode installed in each SLX-D receiver
- Transmitters use 2 AA batteries or Shure SB903 rechargeable battery
- DL4 Omnidirectional Lavalier Microphone
- 5 mm omnidirectional subminiature design for discrete placement and improved gain-before-feedback
- IP57 dust-resistant, waterproof rated
- Neutral, full sonic quality for broadcast audio, sound for film, speech, theater, and performance applications
- Advanced 1.6 mm Shure Plex cable:
- Dual redundant ground in cable serves as secondary shield for unprecedented longevity
- Immune to memory effect and kinks
- Fully paintable with typical theater paints, pens, and polishes
- Presence Cap included for tailored frequency response provides additional vocal clarity and presence (3-4 dB boost near 10 kHz)
- Available in four colors: Black, Cocoa, Tan, White
- TA4F (mTQG) Connector
Specifications
- SLX-D System
- RF Carrier Frequency Band: G58 (470-514 MHz)
- Working Range: 100 m ( 328 ft)
- RF Tuning Step Size: 25 kHz (varies by region)
- Image Rejection: >70 dB, typical
- RF Sensitivity: −97 dBm at 10-5 BER
- Latency: 3.2 ms
- High-Pass / Low Cut Filter: 150 Hz @ -12 db/oct
- Audio Frequency Response: 20 Hz– 20 kHz (+1, -2 dB)
- Audio Dynamic Range: 118 dB at 1% THD, A-weighted, typical
- Total Harmonic Distortion:
- System Audio Polarity: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (with respect to the ring of the 6.35 mm output) output.
- Mic Offset Range: 0 to 21 dB (in 3 dB steps)
- Operating Temperature Range: -18°C (0°F) to 50°C (122°F)
- Storage Temperature Range: -29°C (-20°F) to 74°C (165°F)
- SLXD4 Dual-Channel Receiver
- Dimensions (H x W x D): 42 x 393 x 152 mm (1.65 x 15.47 x 5.98 in.)
- Weight: 1451 g, without antennas
- Housing: Galvanized Steel
- Power Requirements: 15 V DC @ 600 mA, supplied by external power supply (tip positive)
- RF Input
- Spurious Rejection: >75 dB, typical
- Connector Type: BNC
- Impedance: 50 Ω
- Phantom Power Protection
- 1/4"" (6.35 mm): Yes
- XLR: Yes
- Audio Output
- Gain Adjustment Range: -18 to +42 dB in 1 dB steps
- Configuration
- 1/4"" (6.35 mm): Balanced (Tip = audio +, Ring = audio -, Sleeve = ground )
- XLR: Balanced (1=ground, 2=audio +, 3=audio −)
- Impedance
- 1/4"" (6.35 mm): 1.3 kΩ (670 ΩUnbalanced)
- XLR (line): 400 Ω (200 ΩUnbalanced)
- XLR (mic): 150 Ω
- Full Scale Output
- 1/4"" (6.35 mm): +15 dBV differentially (+9 dBV single)
- XLR: LINE setting= +15 dBV, MIC setting= -15 dBV
- Mic/Line Switch: 30 dB pad
- Networking
- Network Interface: Single Port Ethernet 10/100 Mbps
- Network Addressing Capability: DHCP or Manual IP address
- Maximum Cable Length: 100 m (328 ft)
- SLXD1 Bodypack Transmitter
- Battery Type: Rechargeable Li-Ion or 1.5 V AA batteries
- Dimensions (H x W x D): 98 x 68 x 25.5 mm (3.86 x 2.68 x 1 in.)
- Weight: 89 g
- Housing: PC/ABS
- Audio Input
- Connector: 4-Pin male mini connector (TA4M)
- Impedance: 1 MΩ
- Maximum Input Level: 8.2 dBV (2.57 Vrms, 7.27 Vpp)
- Preamplifier Equivalent Input Noise (EIN): -118 dBV
- RF Output
- Antenna Type: 1/4 wave
- Occupied Bandwidth:
- Modulation Type: Shure proprietary digital
- Power: 1 mW or 10 mW
- DL4 Omnidirectional Lavalier Microphones
- Microphone Capsule: MEMS
- Polar Pattern: Omnidirectional
- Frequency Response: 20 Hz to 20 kHz
- Sensitivity: –42.5 dBV (7.5 mVRMS) @ 1 kHz
- Self-Noise: 31 dB SPL-A (A-weighted, Equivalent Acoustical)
- Signal-to-Noise Ratio: 63 dB
- Maximum SPL: 132.0 dB SPL (1 kHz @ 1% THD, typical)
- Dynamic Range: 101.0 dB (Typical)
- Microphone Current Draw: 220 µA, maximum
- Bias Voltage (Recommended Operating Voltage): 5 VDC
- Housing: Molded ABS
- Polarity: Positive Pressure on diaphragm produces positive voltage on Pin 3 with respect to Pin 1
- Cable Diameter: 1.6 mm
- Cable Length: 66.0 in (1.67 m)
- Net Weight: 15.0 g (0.53 oz)
- Capsule Dimensions (L × D): 14.5 mm × 5.2 mm
