Product Overview
LEA Professional CS84 4-Channel 80W Power Amplifier with DSP, Ethernet, IoT Enabled
Part of LEA Professional’s Internet of Things (IoT) enabled amplifiers, the CS84 is a 80-watt per channel, 4-channel power amp that can output at HiZ (70V or 100V) or LoZ selectable by channel. The amp has three ways to connect, use the amp’s built in WiFi access point, connect to the venue’s WiFi, or use the FAST Ethernet to connect to any local area network via the Cat5 or Cat6 cable.
LEA Professional CS84 Features:
- Web browser based UI that works on any device with no software to download
- Proprietary Smart Power Bridge allows user to bridge a channel to achieve double the power to that channel without sacrificing and amplifier channel
- Direct LoZ and HiZ (70V or 100V) selectable per channel
- 3 Way to connect: Built-in WiFi access point, Connects to existing WiFi network, Local area network Ethernet connection
- Universal switch mode power supply. Operates from 100VAC to 24VAC +/- 15%
- 96kHz Analog Devices DSP with input routing, multiple 48dB/octave crossover filters, 8 parametric EQ filters, user configurable speaker limiters, and real-time monitoring
- Fully routable analog inputs
- External I/O port for remote on/off and fault monitoring
- High efficiency Class D output stage for low AC current draw
LEA Professional CS84 Specifications:
- Power output per channel: 40W @ 2Ω, 80W @ 4Ω, 80W @ 8Ω, 80W @ 70V/100V
- Inputs: 4 channels with user selectable 26dB and 34dB input sensitivity
- THD+N: 0.1% (20Hz – 20kHz)
- Frequency Response: 20Hz to 20kHz +/-0.5dB (4Ω, 8Ω, 70V, 100V), -2.5dB @ 20kHz for 2Ω
- Signal to Noise level: 105dB (20Hz to 20kHz referenced to 8Ω)
- Crosstalk: 70dB (20Hz to 20kHZ)
- DSP Architecture: Analog Devices Sigma 06kHz DSP processor with 32-bit Core with sample rate converters
- Amplifier Output Classification: Class D with proprietary Smart Power Bridge Technology allowing bridged output function without sacrificing and amplifier channel
- Crossovers: up to 48dB/octave IIR filters (Linkwitz, Riley, and Butterworth
- Input Matrix: Routable matrix, any input to any output with primary and secondary input priority
- Output Delay: 100ms per channel
- Parametric EQ 8-band parametric EQ per channel
- Output Protection: DC, VHF, and AC mains protection, overtemp and current limiter, fan fault detection
- User Adjustable Limiting: Peak voltage and RMS voltage
- Load Monitoring: Realtime Load Monitoring, and pilot tone detection from internal or external sources
- User Interface: Web browser interface, user interface, or CLOUD control
- External I/O: External I/O in toggles remote on/off, external I/O out indicates amplifier health
- Power Supply: Universal switch mode power supply
- AC Mains: 100VAC – 240VAC +/-15% 50Hz or 60Hz
- Dimensions: 14.25” x 19” x 1RU (362mm x 482mm x 1RU)
- Weight: 12.25 lbs. (5.56 kg), Shipping weight: 16.55 lbs. (7.51 kg)
- Cooling: Front to rear variable fan speed cooling. Fan noise at 1m: 50dB at idle, 57dB at 50%, 63dB at full speed
