Product Overview
The Shure MXA710 2-foot Linear Array Microphone delivers high-quality audio capture to your AV conferencing environments. It features a sleek, linear form factor that allows you to choose the ideal operational placement in virtually any meeting space. Whether it's a wall, ceiling, display, or table, available mount kits (some purchased separately) allow you to place the MXA710 where you need it most. The microphone includes proprietary Shure IntelliMix processing with Autofocus technology and steerable coverage, providing accurate voice capture of all participnts. Giving everyone a seat at the table. The integrated DSP also applies echo and noise cancellation algorithms to remove annoying room effects, providing concise, articulate transmission of your critical information. Available in two sizes and three colors, the MXA710 provides high-quality audio capture without sacrificing aesthetics. It also offers seamless connectivity to the broader Shure networked ecosystem, and is easily configured with the Shure Designer software. The MXA710 can be used with the IntelliMix Audio Conferencing Processor or Shure Audio Network Interfaces (all sold separately) to enable Shure Audio Encryption, protecting confidential content.
Note: Customer must have certification in order to purchase bundles and/or products within the Microflex line. Please contact your Full Compass sales pro with any questions.
Shure MXA710-2FT Includes:
- 2-foot linear array microphone
- Wall-mounting bracket (2 foot)
- Hardware kit with:
- Wall cover plate and screws (US and UK versions)
- Mounting eyelet screws (2)
- Washers for eyelet screws (2)
- Cable ties (2)
Shure MXA710-2FT Features:
- Steerable Coverage™ technology to capture audio anywhere in the room (up to 4 lobes with a 2-foot array, 8 lobes with a 4-foot array)
- Autofocus technology fine-tunes each lobe position in real time, even if meeting participants lean back or stand up.
- Default room coverage template enables quick and easy lobe optimization for wall, ceiling, or table installations.
- IntelliMix DSP includes automatic mixing, acoustic echo cancellation, noise reduction, and automatic gain control.
- Shure Designer System Configuration software for easy setup and configuration
- SystemOn Audio Asset Management software for remote management and troubleshooting
- PoE powered
- LED status bars with configurable colors and brightness
- Dante & AES67 audio networking protocols
- Shure network audio encryption compatible
- Multiple mounting accessories available for wall, ceiling, or table installation
- Compatible devices
- MXA910
- MXA920
- MXA710
- MXA310
- P300
- IntelliMix Room
- ANIUSB-MATRIX
- MXN5-C
- MXA Network Mute Button
Shure MXA710-2FT Specifications:
- Lobe Width
- Adjustable
- Narrow: 30 degrees
- Medium: 40 degrees
- Wide: 70 degrees
- Connector Type: RJ45
- Power Requirements: Power over Ethernet (PoE), Class 0
- Power Consumption: 10 W maximum
- Weight
- MXA710-2FT: 2 lbs (0.91 kg)
- MXA710-4FT: 3.7 lbs (1.67 kg)
- Control Software: Shure Designer
- Plenum Rating: UL2043 (Suitable for Air Handling Spaces)
- Dust Protection: IEC 60529 IP5X Dust Protected
- Operating Temperature Range: −6.7°C (20°F) to 40°C (104°F)
- Storage Temperature Range: −29°C (-20°F) to 74°C (165°F)
- Audio
- Frequency Response: 100 Hz to 20 kHz
- AES67 or Dante Digital Output
- Channel Count
- MXA710-2FT: 6 total channels (4 independent transmit channels, 1 Automix output, 1 AEC reference in channel)
- MXA710-4FT: 10 total channels (8 independent transmit channels, 1 Automix output, 1 AEC reference in channel)
- Sampling Rate: 48 kHz
- Bit Depth: 24
- Sensitivity at 1 kHz
- MXA710-2FT: -7.4 dBFS/Pa
- MXA710-4FT: -7.9 dBFS/Pa
- Maximum SPL Relative to 0 dBFS overload
- MXA710-2FT: 101.4 dB SPL
- MXA710-4FT: 101.9 dB SPL
- Signal-To-Noise Ratio Ref. 94 dB SPL at 1 kHz: 71.2 dB A-weighted
- Latency, Does not include Dante latency
- Direct Outputs: 8.7 ms
- Automix output (Includes IntelliMix processing): 19.3 ms
- Self Noise
- MXA710-2FT: 22.9 dB SPL-A
- MXA710-4FT: 22.8 dB SPL-A
- Built-in Digital Signal Processing: Automatic mixing, Acoustic Echo Cancellation (AEC), Noise Reduction, Automatic Gain Control, Compressor, Delay, Equalizer (4-band Parametric) , Mute, Gain ( 140 dB range)
- Acoustic Echo Cancellation Tail Length: Up to 250 ms
- Networking
- Cable Requirements: Cat 5e or higher (shielded cable recommended)
