RDL RU-VDA4B 1x4 BNC NTSC/PAL Video Distribution Amp

The RU-VDA4B is the ideal choice in most applications where video signals need to be distributed. Video inputs and outputs are made on the front panel via BNC, PHONO, or type F jacks. Power connections are made using full-size barrier block terminals on the rear panel.

The RU-VDA4B has two jacks in the input stage. One jack is for the input signal; the other is a loop through output of the source signal. The input stage is bridging. If 75 O termination of the input signal is required, the termination is plugged onto the LOOP OUT jack.

Gain is user adjustable from the front panel. The GAIN potentiometer allows adjustment from -1 dB to +7 dB.

RDL RU-VDA4B Features:

• Video Distribution with 4 Outputs
• Adjustable Gain Amplification
• Input LOOP OUT Jack
• Video 1 Volt Signal Indicator
• 10 MHz Bandwidth, NTSC or PAL
• 1/3-Rack, High-Density Rack Mounting

RDL RU-VDA4B Specifications:

• Input: 1 kO bridging 75 O line
• Gain: -1 dB to +7 dB (0.9 to 2.25 V p-p, adjustable)
• Outputs: 1 LOOP OUT from input signal; 4 amplified outputs
• Output Level: 1 V p-p into 75 O
• Frequency Response: 10 Hz to 10 MHz (± 0.2 dB)
• Noise: < -70 dB below (1 V p-p)
• Output Isolation: > 40 dB
• Differential Gain: 0.1%
• Differential Phase: 0.1 degree (measured at 10% and 90 APL)
• Connector Type: BNC, PHONO, or Type F
• Ambient Operating Environment: 0° C to 55° C
• Power Requirement: GROUND-REFERENCED, 24 Vdc @ 60 mA
• Dimensions: Height: 1.7 in (4.3 cm), Width: 5.8 in (15.0 cm), Depth: 3.0 in (7.7 cm)
• Package Type: Cardboard Box
• Package Dimensions: 4.375 x 7 x 2.25 in.
• Shipping Weight: 0.93 lbs.
• WEEE weight: 0.665 lbs.
• Tariff code: 8543.70.9960