Product Overview
This multi-IO Dante network audio wallplate is the unD6IO from Attero Tech. It features XLR, RCA and 3.5 mm inputs along with one 3.5 mm and two balanced outputs in a dual-gang form factor. Plus, the unD6IO is PoE enabled allowing all connectivity (power, control and audio data) to be delivered through a single CAT-5e/6 cable.
Attero Tech unD6IO Features:
- 2 x balanced XLR mic/line inputs, 2 x RCA and 1 x 3.5 mm input
- 1 x 3.5 mm output and 2x balanced outputs on a side-mounted depluggable connector, with software-controllable volume
- Q-SYS control plugin enables easy integration into the Q-SYS Ecosystem
- PoE capable
- Three software-selectable gain levels are available on the XLR input to accommodate a wide variety of input levels and devices.
- +48 V phantom power
- Dante Domain Manager-ready
Attero Tech unD6IO Specifications:
- Audio Inputs
- Input types:
- 2 x XLR (balanced and RF filtered)
- 2 x RCA (stereo unbalanced)
- 1 x 3.5 mm (stereo unbalanced)
- Gain: -18 dB, -3 dB, +25 dB and +40 dB, software selectable (Inputs 1/2)
- Maximum input levels:
- +20 dBu @ -18 dB gain
- +6 dBu @ - 3 dB gain
- -23 dBu @ +25 dB gain
- -38 dBu @ +40 dB gain (Inputs 1/2)
- +12 dBu (Inputs 3/4 A & B)
- Phantom power: +48 V (Inputs 1/2 only)
- Audio Outputs
- Output type:
- Two balanced line level with automatic muting on loss of Dante signal on 6-pin Depluggable Euroblock (Outputs 1/2 B)
- Two unbalanced line level outputs on stereo 3.5 mm TRS (Outputs 1/2 A)
- Maximum output levels:
- +12 dBu at 0 dB attenuation (output 1/2 A)
- +20 dBu at 0 dB attenuation (output 1/2 B)
- Attenuation range: -60 dB to 0 dB (software-controlled)
- Dante Network
- Physical level: Standard Ethernet
- Connector: Single RJ-45
- Cable type: CAT-5e or higher
- Supported sample rates: 44.1 kHz, 48 kHz
- General
- Power: PoE (802.3af)
- Dimensions (HxWxD): 4.2" x 3.5" x 2" (114.3 x 88.9 x 50.8 mm)
- Weight: 0.6 lb (.27 kg)
