RDL DS-RT2 Remote Control Selector, Stainless Steel

The D SERIES-RT2 is part of the RDL accessories group and is designed as a functional and visual complement to many other RDL remote controls such as the D-RLC2, D-RLC3 or D-RLC10K Remote Level Controls. The -RT2 is a wall-box mounted remote module designed to directly control equipment which utilizes pull-to-ground switching. The front panel of the -RT2 features two pushbuttons with two associated LEDs. Upon initial power-up, the OFF mode is selected. Touching the other button de-selects OFF and immediately selects ON.

An LED adjacent to each button shows which mode is selected. In a typical installation, the -RT2 may be used to turn an audio or video source on or off. To turn on an audio source, the -RT2 may be connected to an RDL ST-SSR1 or ST-RX2 Solid-State Audio Switch. For video switching, an RDL TX-MVX may be used. In each of the above examples, only one output terminal is needed for triggering, therefore a single shielded pair (3-conductor cable) is required for remote connection. For more complex switching networks, both outputs (ON and OFF) may be used. In an audio or video control installation, the -RT2 may be mounted adjacent to an RDL remote volume control, such as the D-RLC2, D-RLC3 or D-RLC10K.