RDL DB-RLC10M Remote Level Control with Muting, Rotary Optical Encoder, Bk

Remote Level Control with Muting, Rotary Optical Encoder, Bk

Features: Rotary Optical Encoder Remote Level Control Single or Multiple Control Locations Up To Ten Remote Control Locations Integral 0 to 10 VDC Ramp Generator Visual Level Display of Operating Level Display is Bright During Adjustment Display Dims After Adjustment Powers Up to Last Level or Stored Preset Level Compatible with All RDL VCA Modules Available in Stainless Steel, Black and White

The D SERIES-RLC10M is a rotary remote level control with pushbutton muting that provides user adjustment at single or multiple locations. Optical encoder technology allows continuous knob rotation with a comfortable adjustment rate and long-term trouble-free and noise-free operation. These controls directly connect to any RDL VCA and OEM equipment with 0 to 10 Vdc ramp inputs.

• Rotary Optical Encoder Remote Level Control

A single –RLC10M may be connected to a ramp-controlled VCA using a single-pair shielded audio cable or unshielded cable. A rear-panel switch configures the control as the PRIMARY. The PRIMARY mode causes this control to drive the 0 to 10 Vdc ramp output and to monitor its pulse terminals in case any other –RLC10M controls are connected.

• Single or Multiple Control Locations

As many as nine additional –RLC10M controls may be wired in parallel with the PRIMARY control using UTP cable (CAT5, CAT6 or equivalent). The rear-panel MODE switch on each additional remote control is set to SECONDARY mode.

• Up To Ten Remote Control Locations

Operation is the same for a single control, or for each control connected in a multiple control point installation. The 0 to 10 Vdc ramp voltage is incremented up or down when the front-panel knob is rotated. Acceleration is provided so the rate of change is faster when the knob is rotated more rapidly, yielding a responsive feel and rapid elimination of acoustic feedback. The LED ring display encircling the control knob operates as a virtual pointer. When an –RLC10M is not being adjusted, its display switches to a dim intensity to avoid being a visual distraction. The display returns to a bright intensity during adjustment.

• Integral 0 to 10 VDC Ramp Generator

Upon power-up or re-powering after a power loss, the 0 to 10 Vdc ramp will output either a preset level or the last level used. The power-up mode is stored when the control is installed. When programmed for the preset level mode, the user can store a new preset level by holding the MUTE button for more than 3 seconds.

• Visual Level Display of Operating Level

Multiple –RLC10M controls set to the SECONDARY MODE may be connected to an RDL RU-VCA2A or RU-VCA6A, utilizing the VCA as the ramp generator. This connection is also possible with OEM equipment accepting open-collector pulses that are compatible with the –RLC10M output pulse rate and width.

• Display is Bright During Adjustment

The –RLC10M controls are constructed on a steel frame. The electronics are fully protected within the rear enclosure. Connections are made through a rear panel detachable terminal block. The MUTE pushbutton is a long-life switch mounted to provide protection from excessive frontal force.

• Display Dims After Adjustment

All the D SERIES-RLC10M features combine to make it the ideal choice for single point or multiple location remote level control with muting in high quality systems. Use them with any RDL VCA module, or side-by-side with other RDL remote accessories as part of a complete audio/video system.

• Powers Up to Last Level or Stored Preset Level

DB-RLC10M

• Compatible with All RDL VCA Modules

Remote Level Control with Muting

• Available in Stainless Steel, Black and White

Ramp:0 to 10 Vdc (Secondary mode input; Primary mode output)Pulse outputs (2):Open-Collector @ 20 mA (UP, DOWN)Pulse duration:500 uS (min.) to 4 mS (max.)Pulse interval:500 uS (min., between consecutive pulses)Rotations, approximate min-to-max:5 (slow rotation, no acceleration)3 (medium rotation, with acceleration)1 (fast rotation counterclockwise)Level Control:Optical rotary encoderMuting:Momentary pushbutton with LED indicatorPower Requirement:24 Vdc @ 50 mA, Ground-referencedMounting:Mounts in standard US electrical box, RDL WB- or SMB- series boxes; cover plate available separatelyDimensions:Height: 4.11 in. 10.44 cm; Width: 1.31 in. 3.33 cm; Depth: 0.98 in. 2.49 cm (w/o knob); Depth: 0.545 in. 3.93 cm (overall)Package Type:Cardboard BoxPackage Dimensions:3.625 x 4.625 x 2.125 in.Shipping Weight:0.43 lbs.WEEE weight:0.28 lbs.Tariff code:8543.70.9960

Ramp:0 to 10 Vdc (Secondary mode input; Primary mode output)

Ramp:

0 to 10 Vdc (Secondary mode input; Primary mode output)

Pulse outputs (2):Open-Collector @ 20 mA (UP, DOWN)

Pulse outputs (2):

Open-Collector @ 20 mA (UP, DOWN)

Pulse duration:500 uS (min.) to 4 mS (max.)

Pulse duration:

500 uS (min.) to 4 mS (max.)

Pulse interval:500 uS (min., between consecutive pulses)

Pulse interval:

500 uS (min., between consecutive pulses)

Rotations, approximate min-to-max:5 (slow rotation, no acceleration)3 (medium rotation, with acceleration)1 (fast rotation counterclockwise)

Rotations, approximate min-to-max:

5 (slow rotation, no acceleration)

3 (medium rotation, with acceleration)

1 (fast rotation counterclockwise)

Level Control:Optical rotary encoder

Level Control:

Optical rotary encoder

Muting:Momentary pushbutton with LED indicator

Muting:

Momentary pushbutton with LED indicator

Power Requirement:24 Vdc @ 50 mA, Ground-referenced

Power Requirement:

24 Vdc @ 50 mA, Ground-referenced

Mounting:Mounts in standard US electrical box, RDL WB- or SMB- series boxes; cover plate available separately

Mounting:

Mounts in standard US electrical box, RDL WB- or SMB- series boxes; cover plate available separately

Dimensions:Height: 4.11 in. 10.44 cm; Width: 1.31 in. 3.33 cm; Depth: 0.98 in. 2.49 cm (w/o knob); Depth: 0.545 in. 3.93 cm (overall)

Dimensions:

Height: 4.11 in. 10.44 cm; Width: 1.31 in. 3.33 cm; Depth: 0.98 in. 2.49 cm (w/o knob); Depth: 0.545 in. 3.93 cm (overall)

Package Type:Cardboard Box

Package Type:

Cardboard Box

Package Dimensions:3.625 x 4.625 x 2.125 in.

Package Dimensions:

3.625 x 4.625 x 2.125 in.

Shipping Weight:0.43 lbs.

Shipping Weight:

0.43 lbs.

WEEE weight:0.28 lbs.

WEEE weight:

0.28 lbs.

Tariff code:8543.70.9960

Tariff code:

8543.70.9960