Radial Engineering PROD2-PK2-K ProD2 Stereo Passive Direct Box with two XLR and two instrument cables

This bundle includes the ProD2 direct box, MIC-XX-25 cables and G-HT-25-R cables.

The ProD2 design includes two high performance Eclipse ET-DB2 transformers. These deliver 20Hz to 20kHz performance with less than 1.5dB deviation above 18kHz and are able to withstand tremendous signal levels without distortion. Unlike active circuits that overload when the signal exceeds the rail voltage, transformers saturate. This creates a pleasing effect that naturally rounds out the tone, acting like a subtle limiter which is particularly advantageous when interfacing the ProD2 with digital pianos, samplers and drum machines that can produce excessive dynamics. Transformers are particularly adept at eliminating hum and buzz caused by ground loops.

Cable Up Industrial's line of High-Tec guitar cables are built with special low capacitance, low loss polyethylene insulated cables with oxygen free copper cores designed specifically for high impedance instrument applications. The High Tec cables feature a conductive plastic PVC layer next to a copper braided shielding, thus minimizing static noise due to mechanical movement. These cables deliver a pristine and totally clear sound with minimal noise, offering an essential uncolored guitar sound for discerning guitar players.

Cable Up's rugged Industrial line features high-performance, balanced analog microphone cables. The soldered XLR connectors are fitted with gold-plated contacts for reliable professional use at a competitive price.

All Cable Up® Industrial cables are covered by a 1-year unconditional warranty and a limited lifetime warranty against defects in material or workmanship.

Features

• Stereo direct box designed for keyboards
• Smooth, warm sound rounds out digital edge
• Able to handle huge transients without choking
• May be rack mounted for touring rigs

Specifications

• Audio circuit type: Passive, transformer based
• Transformer: Eclipse ET-DB2, 12:1 ratio
• Number of channels: 2
• Frequency response: 20Hz ~ 18.5KHz (± 0.2dB)
• Dynamic range: 128dB
• Total harmonic distortion: 0.01% from 20Hz~20kHz @-10dB
• Phase Deviation: 1° @ 100Hz; 8° @ 20Hz
• Input Impedance: 140k Ohms, unbalanced
• Output Impedance: 150 Ohms, balanced
• Maximum Input: +18dB @ 20Hz
• Features
  • Input pad, 180° polarity reverse, Ground lift
  • Input Connectors: 1/4"
  • Output Connectors: XLR, 1/4" thru
• General
  • Construction: 14 gauge steel chassis & outer shell
  • Size (L x W x D): 5" x 3.3" x 1.8" (127mm x 84.1mm x 45.5mm)
  • Weight: .54kg (1.2lbs)
  • Shipping size (L x W x D): 6.5" x 4" x 3" (165mm x 102mm x 76mm)
  • Shipping weight: 0.61 kg (1.35 lbs)
  • Power: Passive, no power required
  • Conditions: For use in dry locations only between 5°C and 40°C