Atlas IED AP-S15IP Rackmount Power Conditioner and Distribution, LAN Monitoring

Atlas's AP-S15IP is a versatile nine-outlet AC power conditioner that can be controlled and monitored remotely via an online user interface (UI). The UI uses IP discovery software to automatically detect and identify all of the units connected to the network. From there, it can be used to monitor voltage, current, temperature, and humidity. The included LED display (AP-LEDIP) also allows the user to view this information.

If needed, the temperature/humidity probe can activate a cooling system to prevent overheating. Also, the UI can alert users when a fault condition has occurred; alarm settings can be configured with fault logs and fault reporting.

Programming and control only continue from there! It can also program On/Off schedules for each of the eight rear outlets on a 24-hour / 7-day schedule. The Auto Ping Reset feature allows you to test the unit or individual outlets for active status. Hard-wired switches with LED status indicators can be used to manually turn the outlets on or off, but for heightened security this can be disabled via the UI. Additional protection is provided by filtering out unwanted Radio Frequency Interference (RFI), giving you a clean signal.

The AP-S15IP is designed to utilize one rack space (1RU) in a full-width equipment rack. Uniquely, it comes with a 2m (6.6') IEC power cord that can easily be swapped out for one of a different length to meet your installation needs.

Atlas Sound AP-S15IP Features:

• 15A Rack Mount Power Strip with web enabled monitoring & control
• Supports LAN (Local Area Network) type networks
• On-board IP Address display
• IP discovery PC software
• 9 total AC Outlets: 8 rear panel programmable switched outlets, 1 front panel unswitched convenience outlet
• Individual outlet on/off manual switch and LED indicator (enable/disable)
• Removable 15A IEC power cord with retainer bracket
• RFI noise filtering
• Earth ground fault connection indicator
• Web user interface
• DHCP or static IP addressable
• Voltage, current, temperature and humidity monitoring capability
• Over-voltage, current, temperature and humidity alarm settings
• Each outlet can be individually managed remotely
• User-definable names for each outlet
• User-definable delay time and sequence
• Temperature setting for AC fan activation
• Fault log with reporting
• Fault reporting GPIO port
• Password protection
• APRST (Auto PING Reset)
• User-definable 24/7 schedules of individual outlets to switch devices on or off
• 2-Meter humidity/temperature probe
• AP-LEDIP display panel shows voltage, current, temperature, humidity and IP Address

Atlas Sound AP-S15IP Specifications:

• Power Rating: 15A IT/Audio Applications, 12A continuous
• Ethernet Connector: 10/100Mbps
• Operating Voltage: 100VAC-132VAC
• Circuit Breaker Protection: 15A
• Power Consumption: 8-Watts
• Minimum Spike Clamping Voltage: 460VRMS @ 3,000A
• Maximum Spike Clamping Voltage: 6,000V, 1 nanosecond
• Spike Clamping Voltage @ 100A: 1,250Vp for 20μs
• Maximum Surge Current: 6,500A
• Operating Temperature Range: 40º - 105ºF (5º - 40.5ºC)
• Height: 1.75" (44.5mm) 1RU
• Width: 19" (482.6mm)
• Depth: 7.3" (187mm)
• Weight: 5.5 lbs. (2.5kg)
• Shipping Weight: 7.72 lbs. (3.5kg)
• Safety Listed: UL 90950-1