Product Overview
The VX-2000DS Emergency Power Supply Unit supplies the DC power to each equipment in the VX-2000 system by connecting the VX-200PS Power Supply Unit. It keeps the battery unit that contains 2 × 12 V sealed lead batteries charged compensating for the temperature of the battery charging voltage. When the DC power supply from the VX-200PS stops, the VX-2000DS is automatically switched to the backup battery.
TOA VX-2000DS-AMQ Specifications:
- Power Source: 230 V AC, 50/60 Hz
- Power Consumption: 240 W max.
- Applicable Battery: Panasonic LC-X1265PG/APG (65 Ah)
- Charging Method: Trickle charging
- Charging Current: 5 A max.
- Charging Output Voltage:
- 27.3 V ±0.3 V (at 25 C (77 F))
- Temperature correction coefficient: -40 mV
- Power Supply Input: 6 M4 screw terminal, distance between barriers: 11 mm (0.43")
- DC Power Output: 6 (25 A max. each) M4 screw terminal, distance between barriers: 11 mm (0.43")
- Control Connector:
- RJ45 female connector for connecting the VX-2000SF Surveillance Frame.
- Twisted-pair straight cable (TIA/EIA-568A standard)
- Type of control signal: Battery check, AC power status, DC power status, charging circuit failure, and battery failure
- Battery Connection:
- 1 pair of positive and negative terminals
- Applicable cable diameter: AWG 6 - AWG 0 (1/0) (Line resistance within 4 mO/total)
- 2
- Cross sectional area: 16 - 50 mm
- Operating Temperature: 0 C to +40 C (32 F to 104 F)
- Finish Panel: Surface-treated steel plate, black, 30 % gloss, paint
- Dimensions: 482 (W) × 88.4 (H) × 377.6 (D) mm (18.98" × 3.48" × 14.87")
- Weigh:t 10.5 kg (23.15 lb)
- Accessory:
- Rack mounting screw …4
- Fiber washer …4
- Blade fuse (40 A) …3
- Fuse (T3.15A L) …1
- Power cord (2 m (6.56 ft)) …1
- Insulating sheet …1
- Attention label (German) …1
- Fastener hook …4
- Fastener loop …4
- Sticker (Declaration of compliance) …1
- Thermal insulating sheet …1
- Fuse Rating: Blade fuse (40 A), Blade fuse (7.5 A), Fuse (T3.15A)
- Internal Resistance: Maximum internal resistance of the battery and its associated circuitry, Ri max: 50 mO
- Current Specification:
- Maximum output current draw from the battery: 43.5 A
- Rated maximum continuous output current, I max a: 43.5 A
- Rated maximum short duration output current, I max b: 43.5 A
- Rated minimum output current, I min: 0 A
- Cable Specification:
- Recommended cable parameter for DS-SF Link:
- Twisted-pair straight cable (TIA/EIA-568A standard)
