Product Overview
The UPM‑2XP, with IntelligentDC technology, is a compact, externally-powered, narrow-coverage loudspeaker for professional sound reinforcement. It offers the same high sound pressure levels, low distortion, and uniform directional control as the UPM‑2P but with the added flexibility of external DC power and support for lengthy cable runs without AC conduits.
The UPM‑2XP is ideally suited for narrow-coverage applications requiring a small, inconspicuous cabinet where AC cabling is not feasible. As a standalone loudspeaker, the UPM‑2XP can be used for vocal reinforcement, frontfill coverage, or delay coverage for underbalcony applications. For full-range systems, the UPM‑2XP can be paired with Meyer Sound’s UMS‑1XP ultracompact subwoofer with IntelligentDC technology.
With IntelligentDC technology, the UPM-2XP receives DC power and balanced audio from a single loudspeaker connector. Powering the unit from an external source eliminates the need for wiring conduits while still preserving the advantages of self-powered systems.
Applications:
- Frontfill and under-balcony fill coverage
- Theatrical sound reinforcement
- Portable and installed audio-visual systems
- Effects for theater
- Compact voice reinforcement systems
Features:
- IntelligentDC technology affords the flexibility of lengthy cable runs without AC conduits
- Extraordinary fidelity and power capability come together in an ultracompact package
- Metal dome tweeter delivers a smooth high-frequency response
- Narrow, symmetrical pattern provides precise coverage control
- Unique crossover design eliminates combing and yields a consistent midrange response
- Exceptional SPL to size ratio supports a variety of applications
Specifications:
- Acoustic
- Operating Frequency Range: 80Hz – 20kHz
- Frequency Response: 85Hz – 19kHz ±4dB
- Phase Response: 300Hz – 18kHz ±60°
- Linear Peak SPL: 123dB with 18dB crest factor (M-noise), 120dB (Pink noise), 120.5dB (B-noise)
- Coverage
- Horizontal Coverage: 45°
- Vertical Coverage: 45°
- Transducers
- Low Frequency: Two 5-inch cone drivers; 8Ω nominal impedance
- High Frequency: One 1-inch metal dome tweeter; 8Ω nominal impedance
- Audio Input
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±15VDC, clamped to earth for voltage transient protection
- Connectors: Phoenix 5-pin Male; SwitchCraft 5-pin Male; ECO-M 7-pin Male (two pins for 48VDC power, three pins for balanced audio)
- Input Impedance: 10kΩ differential between positive (+) and negative (-) audio pins
- Wiring
- Phoenix 5-pin Male
- Pin 1: DC Power (-)
- Pin 2: DC Power (+)
- Pin 3: Chassis/earth through 1kΩ, 1000pF, 15V clamp network to provide virtual ground lift at audio frequencies
- Pin 4: Audio (-)
- Pin 5: Audio (+)
- SwitchCraft EN3 5-pin Male
- Pin 1: DC Power (-)
- Pin 2: DC Power (+)
- Pin 3: Chassis/earth through 1kΩ, 1000pF, 15V clamp network to provide virtual ground lift at audio frequencies
- Pin 4: Audio (-)
- Pin 5: Audio (+)
- ECO-M 7-pin Male
- Pin 1: DC Power (-)
- Pin 2: DC Power (+)
- Pin 3: Chassis/earth through 1kΩ, 1000pF, 15V clamp network to provide virtual ground lift at audio frequencies
- Pin 5: Audio (-)
- Pin 6: Audio (+)
- Nominal Input Sensitivity: –8.0dBV (0.4V rms) continuous average is typically the onset of limiting for noise and music
- Input Level: Audio source must be capable of producing of +20dBV (10V rms) into 600Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
- Amplifier
- Type: 3-channel, Class-D
- Total Output Power: 650W peak
- THD, IM, TIM < 0.02%
- Cooling: Convection
- DC Power
- Connector: Phoenix 5-pin Male; SwitchCraft 5-pin Male; ECO-M 7-pin Male (two pins for 48VDC power, three pins for balanced audio)
- Safety Rated Voltage Range: 48VDC
- RMS Network (Optional) - Equipped with two-conductor twisted-pair network, reporting all operating parameters of amplifiers to system operator’s host computer.
- Physical
- Dimensions: W: 6.85in (174mm) x H: 18.00in (457mm) x D: 7.70in (196mm)
- Weight: 17lbs (7.7kg)
- Enclosure: Premium multi-ply birch with slightly textured black finish
- Protective Grille: Powder-coated, hex-stamped steel with black mesh
- Rigging: Three 3/8-inch-16 or metric M10 nut plates
