Clear-Com CC-400-B6 Double-ear Headset with On / Off Switch, Untreminated

The CC-400-B6 dual-ear headset features a dynamic cardioid microphone offering rejection of off-axis sounds generated from the back and sides in noisy environments. The adjustable headband and soft leatherette ear pads were designed to provide comfort during long periods of use. This light-weight closed-back headset comes with a removable cable allowing for quick connector changes or in the field repairs. In fact, all component parts are serviceable with a philips screwdriver. For convenience, the CC-400,s flexible boom arm acts as an on/off mute by simply moving the arm up or down. The boom arm can also be rotated so you can wear the headset on the left or right side for flexibility. The large cup dual over-ear design of the CC-400 provides optimal isolation from outside sounds.

The B6 designation means this headset arrives without a connector.

Features

• Light-weight
• Cardioid microphone for off axis rejection
• Closed-back dual over-ear design provides optimal isolation
• flexible mic boom arm
• Interchangeable cable
• Boom arm acts as an on/off mute switch
• Can be worn on either the left or right side
• Comes with soft leatherette earpads

Specifications

• Headphone
  • Type: Closed-back
  • Driver: 40mm diameter, neodymium magnet, copper-clad aluminum wire voice coil
  • Frequency Response: 40Hz – 20kHz
• Microphone
  • Element: Dynamic
  • Polar Pattern: Hyper-cardioid
  • Frequency Response: 300Hz – 20kHz
• Sensitivity
  • Open Circuit Sensitivity: -61.0 dB ±3.5 dB; at 1kHz, typical
  • 98dB ±3 dB (SPL); at 1kHz typical
• Impedance
  • 200 ohms ±30%; at 1kHz typical
  • Microphone: 200 ohms ±30%; at 1kHz typical
• Connector
  • Cable: 5ft (1.55m) long with 8-pin connector at headset end;
• Dimension
  • Packaging for CC-400:
  • 4.8 x 13 x 10.43 in (WxHxD)
  • (122 x 330 x 265 mm)
• Weight
  • 11.1oz (315g) without 8-pin cable assembly and M3*18mm SCREW