Product Overview
The Control SB2210 from JBL is a Dual 10" compact Subwoofer that delivers low-frequency (LF) reinforcement for a wide range of sound system applications. Thanks to its compact form-factor, along with its high output and outdoor-capable design, it's one of the most versatile subwoofers in the installation market. The MTC-210UB U-bracket is available optionally to facilitate mounting the SB2210 to flat, secure surfaces.
Includes
- 1x Control SB2210 unit
- 1x MTC-PC2 input panel cover
- 4x Floor-standing feet
- 4x Beveled washers.
Features
- (2) 250mm (10") Woven Fiberglass Cone LF Drivers
- 500 Watts Power-handling
- Frequency Response Down to 38 Hz
- (13) M6 Insert Points Including Inserts for Optional 1U-Bracket (bracket sold separately)
- Compact, Low-profile Design
Specifications
- Frequency Range (-10 dB): 38 Hz - 500 Hz
- Frequency Response (-3 dB): 48 Hz - 95 Hz
- Power Rating:
- 500 W (2000 W peak) Continuous Pink Noise (2 hrs)
- 1000 W Continuous Program (2 hrs)
- 400 W (1600 W peak) Continuous Pink Noise (100 hrs)
- Maximum Input Voltage: 60.0 VRMS (2 hrs), 120V peak
- Sensitivity: 95 dB, 1W @ 1m in half-space (2π loading, average 50 – 90 Hz)
- Max SPL: 122 dB in half-space (2π loading)
- Nominal Impedance: 8 Ωs
- Minimum Impedance: 7.2 Ω at 160 Hz
- Recommended Filter: 45 Hz, 24 dB/oct high-pass filter
- Low Frequency: Two 250mm (10") diameter LF drivers, long-excursion design, woven fiberglass cone, highly damped butyl rubber surround, linear suspension spider , high temperature anodized aluminum voice coil former, high-temp voice coil wire and coil adhesive, FEA optimized motor construction, aluminum conductive ring.
- Enclosure Material: High Impact PolyStyrene (HIPS) with 10% glass fill and internal 8mm polyurethane co-mold, painted with highly-UV-resistant paint on white model for maximum UV fade resistance.
- Grille: Thermoset composite coated steel, zinc-plated, 3-layer foam backing.
- Environmental: IP45 rating per IEC529 spec when installed with included MTC-PC2 terminal panel cover. Exceeds Mil Spec 810 for humidity, salt spray, temperature and UV. Passes Mil-STd-202F for salt spray.
- Terminals: Screw-down terminal strip, zinc plated copper base, nickel-plated metal screws/washers. Accepts up to 9 mm outside, 4mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5mm2). Included MTC-PC2 and optional MTC-PC3 (sold separately) protective covers available to provide sealed entrance for additional weather protection.
- Agency Rating: ROHS-compliant. Optional MTC-SBT300 transformer is UL recognized per UL1876.
- Dimensions (H x W x D): 14" x 23".3 x 22.5" (355 x 590 x 570mm)
- Net Weight: 51.4 lbs. (23.31 kg)
- Shipping Weight: 57.0 lbs (25.85 kg)
- Note: additional information can be found within the "Control SB2210 Datasheet" located under the "Documentation" tab above.
