Audio-Technica AT-LP60XHP-GM Fully Automatic Belt-drive Turntable with Headphone Output, Headphones Included

Enjoy your vinyl with no additional equipment required, the AT-LP60XHP-GM fully automatic belt-drive turntable with headphone combo from Audio-Technica has you covered. Integrated with a 3.5 mm (1/8") headphone jack and volume control on the front panel, this turntable builds upon the AT-LP60XHP model with a headphone amplifier to play 33 and 45 RPM records. Plug in the included ATH-250AV over-ear headphones (or any headphones of your choice) and start the records spinning. Audio-Technica's ATH-250AV headphones are equipped with 40 mm drivers for clear mid- and low-frequency sound reproduction, are lightweight and comfortable, and feature isolating earpads to listen for as long as you like.

AT-LP60XHP-GM also features a detachable RCA output cable (3.5 mm male to dual RCA male) and built-in switchable phono preamp allowing the turntable be traditionally connected to stereo, powered speakers, or other components. A redesigned tonearm base and headshell improve tracking and reduce resonance. An included AC adapter that moves the AC/DC conversion outside of the chassis, limiting its impact on the signal chain and further reducing unwanted noise. The highly-compatible AT-LP60XBT Dual Magnet™ cartridge features an easily replaceable stylus (compatible style: ATN3600L) and is integrated into the headshell for assured performance. Easy upkeep and connectivity for easy listening—experience the high fidelity audio of vinyl from AT-LP60XHP-GM.

Includes

• ATH-250AV headphones
• Detachable RCA output cable (3.5 mm male to dual RCA male)
• 45 RPM adapter
• Removable hinged dust cover

Features

• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• Integrated headphone amplifier with front-panel 3.5 mm (1/8") headphone jack and volume control
• ATH-250AV over-ear headphones with 40 mm drivers, 3.5 m (11.5') cable and 3.5 mm (1/8") stereo mini-plug
• Redesigned tonearm base and headshell for improved tracking and reduced resonance
• Integral Dual Magnet™ phono cartridge with replaceable diamond stylus (ATN3600L)
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Built-in switchable phono pre-amplifier for phono- or line-level output

Specifications

• Type: Belt drive turntable, fully automatic
• Motor: DC servo-controlled
• Speeds: 33-1/3 RPM, 45 RPM
• Turntable Platter: Aluminum
• Wow and Flutter: Less than 0.25% (WTD) @ 3 kHz (JIS)
• Signal-to-Noise Ratio: >50 dB (DIN-B)
• Output Level: Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec
• Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
• Power Supply Requirements: 120V AC, 60 Hz, 3W
• Dimensions: 14.15" x 3.84" x 14.70"
• Replacement Stylus: ATN3600L
• Headphones
  • Type: Closed-back Dynamic
  • Driver Diameter: 40 mm
  • Frequency Response: 18 – 22,000 Hz
  • Maximum Input Power: 500 mW
  • Sensitivity: 102 dB/mW
  • Impedance: 43 ohms
  • Weight: 97 g (3.4 oz)
  • Cable: 3.5 m (11.5')
  • Connector: 3.5 mm (⅛") stereo mini-plug