Product Overview
The Tripp Lite SMART2200RM2UN offers network-grade power protection for critical server, network, and telecommunications equipment. It’s a line-interactive Uninterruptible Power Supply (UPS) with built-in Auto Voltage Regulation (AVR) that actively corrects brownouts and overvoltages to normal useable levels and maintains a full battery charge in case of power failure.
The interactive display reports UPS operating mode, UPS and site -power data details, and enables UPS setup and configuration options.
Tripp Lite SMART2200RM2UN Includes:
- SMART2200RM2UN UPS system with WEBCARDLX Network Interface
- USB, Serial & EPO cabling
- 4 post rackmount installation kit
- Instruction manual
Tripp Lite SMART2200RM2UN Features:
- 2.2kVA / 2200VA / 1920W line interactive 2U rack/tower UPS; 0.9 power factor
- 120V nominal output during brownouts to 83V and overvoltages to 145V
- Interactive LCD provides UPS status information and advanced configuration options
- Hot-swap batteries, 96% efficiency, Sine wave output
- USB, RS232 & EPO ports, Pre-Installed WEBCARDLX Network Interface
- NEMA 5-20P input; 4 NEMA 5-15R & 4 5-15/20R outlets
- To enable the Auto Probe feature, verthis product requires LX firmware update 15.5.2 or later to be installed
- 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.
- $250,000 Ultimate Lifetime Insurance
Tripp Lite SMART2200RM2UN Specifications:
- Overview
- UPC Code: 037332178015
- UPS Type: Line-Interactive
- Output
- Output Volt Amp Capacity (VA): 2200
- Output kVA Capacity (kVA): 2.2
- Output Watt Capacity (Watts): 1920
- Output kW Capacity (kW): 1.92
- Power Factor: 0.87
- Nominal Voltage Details: 120v nominal output in battery mode
- Frequency Compatibility: 60 Hz
- Output Voltage Regulation (Line Mode): -14%, +6%
- Output Voltage Regulation (Battery Mode): +/- 5%
- Load Management Receptacles: Two switchable single-outlet load banks
- Output AC Waveform (AC Mode): Pure Sine wave
- Output AC Waveform (Battery Mode): Pure Sine wave
- Nominal Output Voltage(s) Supported: 110V; 115V; 120V
- Output Receptacles: (4) 5-15R; (4) 5-15/20R
- Individually Controllable Load Banks: Yes
- Input
- Rated input current (Maximum Load): 16A (120V)
- Nominal Input Voltage(s) Supported: 120V AC
- UPS Input Connection Type: 5-20P
- Input Circuit Breakers: 20A
- UPS Input Cord Length: 10'
- Recommended Electrical Service: 20A 120V
- Input Phase: Single-Phase
- Battery
- Full Load Runtime: 4.5 min (1920w)
- Half Load Runtime: 12 min (960w)
- DC System Voltage (VDC): 48
- Battery Recharge Rate (Included Batteries): Less than 4.5 hours from 10% to 90% (typical, full load discharge)
- Internal UPS Replacement Battery Cartridge: RBC94-2U
- Battery Access: Front panel battery access door
- Battery Replacement Description: Hot-swappable, user replaceable batteries
- Expandable Runtime: No
- Voltage Regulation
- Voltage Regulation Description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145
- Overvoltage Correction: Input voltages between 127 and 145 are reduced by 12%
- Undervoltage Correction: Input voltages between 108 and 96 are boosted by 12%
- Severe Undervoltage Correction: Input voltages between 83 and 95 are boosted by 24%
- Controls
- Front Panel LCD Display: Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
- Switches: 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions. LX Platform Interface: Recessed reset switch for interface reboot and factory reset
- LED Indicators:
- Network Link/Activity (Green): Flashes for network activity
- Network Speed (Yellow): 10 Mbps (Flashing), 100 Mbps (On steady)
- LX Platform Interface Status: Normal Operation (Solid Green); Software Update (Alternating Green/Orange ~1/sec); Factory Reset (Alternating Green/Orange ~2/sec)
- Alarm Cancel Operation: Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available
- Audible Alarm: Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
- Surge / Noise Suppression
- UPS AC Suppression Joule Rating: 570
- UPS AC Suppression Response Time: Instantaneous
- EMI / RFI AC Noise Suppression: Yes
- Physical
- Cooling Method: Fan
- Included Mounting Accessory Description: Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm)
- Installation Form Factors Supported with Included Accessories: 4 post 19 inch rackmount
- Minimum Required Rack Depth: 24.46"
- Primary Form Factor: Rackmount
- Primary UPS Depth: 494 mm
- Primary UPS Height: 87 mm
- Primary UPS Width: 440 mm
- Rack Height: 2U
- Shipping Dimensions (HxWxD): 8.80" x 24.00" x 21.80"
- Shipping Weight: 77.00 lbs
- UPS Housing Material: Steel
- UPS Power Module Dimensions (HxWxD): 3.43" x 17.32" x 19.46"
- UPS Power Module Weight: 57.6 lbs (26.13 kg)
- Environmental
- Operating Temperature Range: +32 to +104 degrees F (0 to +40 degrees C)
- Storage Temperature Range: +5 to +122 degrees F (-15 to +50 degrees C)
- Relative Humidity: 0 to 95%, non-condensing
- AC Mode BTU / Hr (Full Load): 306
- Battery Mode BTU / Hr (Full Load): 1157
- AC Mode Efficiency Rating (100% Load): 96%
- Audible Noise: 45 dBA maximum, front side 1m
- Communications
- Network Monitoring Port Description: Pre-installed WEBCARDLX Network Management Card interface
- PowerAlert Software: For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert
- Communications Cable: Micro-USB, USB and DB9 cabling included
- WatchDog Compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications
- EPO Port: RJ11 interface jack with 4-meter cable included. Supports normally open and normally closed EPO systems
- SNMP Compatibility: SNMP V1, V2c, V3
- Network UPS Tools Compatibility: NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite
- Communications Interface: DB9 Serial; EPO (emergency power off); Micro-USB; Pre-installed network card; RJ45 Network; Slot for SNMP/Web interface; USB (HID enabled); USB-A; USB-B
- Line / Battery Transfer
- Transfer Time: 5 milliseconds (AC to battery mode), 1 millisecond (Battery to AC mode)
- Low Voltage Transfer to Battery Power (Setpoint): 83
- High Voltage Transfer to Battery Power (Setpoint): 145
- Special Features
- Grounding Lug: Back panel grounding lug
- Cold Start (Startup in Battery Mode During a Power Failure): Cold-start operation supported
- High Availability UPS Features: Hot swappable batteries
- Green Energy-Saving Features: Greater than 95% efficiency - GREEN UPS; Individually controllable load banks
- Certifications
- UPS Certifications: Meets FCC Part 15 Category A (EMI); ROHS (Restriction of Hazardous Substances); Tested to CSA (Canada); Tested to NOM (Mexico); Tested to UL1778 (USA)
- Safety (U.S.): UL1778:2014 (5th Ed) R10.17
- Safety (Canada): CAN/CSA-C22.2 No. 107.3-14 (3rd Ed) + GI1
- FCC/ICES Compliant - CLASS A
- Warranty
- Product Warranty Period (Worldwide): 2-year warranty, 3 year with registration
- Note: Registration is required for 3-year warranty