Radial Engineering DiNET DAN-TX2 2-Channel Dante/AES67 Network Transmitter

It's easy to transmit 2 channels of high-quality analog audio over either a Dante or an AES67-compliant network using Radial Engineering's DiNET DAN-TX2.

It features multiple input options, with balanced XLR/TRS connectors for use with professional audio sources, RCA jacks for use with consumer line-level devices, plus a 3.5mm aux input for interfacing with laptops, smartphones and tablets. It's equipped with trim controls and pad switches for each channel, as well as a link switch to simplify stereo source control. Its integrated RJ45 network connection provides compatibility with Neutrik etherCON connector carriers to prevent accidental disconnection and protect cable terminations. It also features redundant powering that's available for critical applications by simultaneously employing the included external power supply along with Power over Ethernet (PoE). The DAN-TX2 can be mounted in 19" equipment racks with the optional SA series rack-mount adapter kit (sold separately).

Features

• Connect any line-level source to a Dante network
• XLR, 1/4″ TRS, RCA and 3.5mm input jacks
• 24-bit/96 kHz analog to digital conversion
• Handles signal levels up to +24 dBu
• Compliant to AES67 specifications

Specifications

• Audio Circuit Type: High-current balanced active input device
• # of Channels: 2
• Frequency Response: 20 Hz to 20 kHz
• Dynamic Range: >103 dB
• Total Harmonic Distortion: 0.008% @ -6 dBfs
• Intermodulation Distortion: 0.0017% @ -10 dBfs
• Equivalent Input Noise (EIN): -98 dB
• Bit Depth: 24-bit
• Sample Rate: 44.1 / 48 / 88.2 / 96 kHz
• Input Connectors: 2 x XLR/TRS combo, 3.5mm TRS, 2 x RCA
  • Input Impedance: 40 kΩ (balanced); 20 kΩ (unbalanced)
  • Maximum Input: +28 dBu
• Output Connector: RJ45 Ethernet with locking etherCON (Dante, AES67 signal)
• Idle Channel Noise: -108 dB
• Chanel Separation: > 85 dB
• Power Connection: 15VDC 400mA adapter (included) or PoE
  • Power Consumption: 1.25W
  • Power over Ethernet (PoE): Class 1 IEEE 802.3af
• Construction: 14-gauge steel
• Finish: Durable powder coat
• Conditions: For use in dry locations only, 5-40°C
• Dimensions (H x W x D): 2" x 6" x 4.5"