Obsidian Control Systems NX2 Compact Lighting Console with HD Touchscreen and 64 Universes of Output

The NX 2 is the ultimate compact yet powerful fully integrated lighting controller from Obsidian Control Systems. As a member of the innovative ONYX platform the NX 2 is feature rich and never restricted in its capabilities. NX 2 includes a high brightness Full HD multi touch screen, 8 assignable parameter encoders, an assistive mini touch screen, full keypad and command section, a dedicated grand master and 10 full playbacks with four freely assignable buttons.

Utilizing the latest in industrial components the NX 2 contains a powerful Intel Hexa-Core processor, high speed NVMe SSD drive and 16GB of DDR4 RAM. Fast boot times, instant operation and the ability to process 64 Universes right inside the console without the need for costly external processing networks result in unprecedented power in this form factor. The NX 2 is ergonomic with its compact footprint, full ONYX command and keypad section and the bright adjustable HD touch screen. It is always ready to run the largest shows and events at a moments notice.

With four DMX ports, Timecode, Midi and dual Gigabit ports for up to 64 Universes of Art-Net, sACN plus the ONYX X-Net protocol the NX 2 has all the connectivity and power the ever-increasing sizes of shows demand. Two additional 4K touch monitors are supported for even more direct access at any time.

Features

• Portable and compact fully featured lighting console
• Adjustable 15.6” Full HD multi touch screen, 2x external 4K Touch Displays
• 64 Universe integrated processing
• 10 Playbacks, 8 Encoders, Keypad and internal 3.5” touchscreen
• Network, DMX, Timecode and Midi Connectivity

Specifications

• Surface:
  • 10 x 60 mm playback faders, each with 4 x function- assignable buttons
  • 8 x customizable multi-function keys
  • Playback Select button
  • Master Go section with Go, Pause, Snap and Release
  • 4 x digital rotary encoders with push function and status LED for fixture parameter control
  • 4x screen mounted digital rotary encoders with push
  • 3.5” RGB touchscreen for parameter groups, effect parameters, fanning and global timings
  • Grand master rotary fader and button
  • Blind/HighLight/Last/Next buttons
  • Full numerical keypad and command keys
• Hardware:
  • Industrial 15.6” TFT 16:9 touchscreen (1920x1080px)
  • 250 GB NVMe M.2 storage drive
  • Industrial motherboard with Intel i5 Hexa-Core CPU
  • Quiet thermal design using advanced copper heat pipe coolers
  • 16 GB DDR4 RAM
  • Integrated graphics processor
  • Windows 10 IoT Embedded Operating System
  • OS installation by USB 3.0 storage device
  • Supports Windows USB touchscreens
• Connections:
  • 4 x DMX / RDM Universe In/Out: 5-pin locking XLR
  • External Display: 2x DisplayPort (up to 4k)
  • Network: 2x Gigabit for Art-Net, sACN and ONYX X-Net
  • Storage and Peripherals: 4x USB 3.0, 1x USB 2.0
  • Audio Out, Mic In: 2x 3.5mm Jack
  • MIDI in/out/thru (MIDI show control, MIDI notes, MIDI timecode): 5pin DIN
  • SMPTE Timecode In/Out: 3-pin XLR
  • 12 VDC power supply input: 4-pin XLR
  • Desk lamp: XLR 12V
  • USB In: USB 2.0 B
• Physical:
  • Length: 11.9 in. (30 0mm)
  • Width: 21.3 in. (540 mm)
  • Height: 4.8 in. (121mm)
  • Weight: 10.2 lbs. (4.6 kg)
• Electrical:
  • AC mains power to 12 VDC external PSU (included): 100-240 V nominal, 50/60 Hz
  • Maximum current: 1.4 A
  • 12 VDC output: 5 A, 60 W max.