Tascam SERIES 102i 10 x 2 USB 2.0 Audio / MIDI Interface

SERIES-102I from Tascam provides professional quality and expandability in an intuitive 10-In/2-Out USB Audio/MIDI Interface. Tascam's Ultra-HDDA (High Denition Discrete Amplier) preamp circuitry provides transparent natural tone with ultra-low noise, while their new generation audio interface engine delivers high-definition, 24-bit/192 kHz recording and solid stability. Expand Input capability up to 8 additional channels with the S/MUX optical port to accommodate future growth. Process audio with no latency issues thanks to the built-in DSP Effects input complemented with digital reverb, compressor, phase invert, and 4-band EQ for each channel. SERIES-102I also supports tablets and other mobile device applications, free and easy-to-use Tascasm Control software, and a USB driver for additional reliability. Simple, intuitive interface, a fresh look, and an angled tabletop design mark SERIES-102I as a new standard for mid-grade audio interfaces.

Features

• Individual phantom power
• S/MUX expandability
• Dual Headphone Outs
• Multi-channel outputs for routing
• A full set of DSP Processing internal – reducing need for PC/MAC processing for monitoring/mixing and recording (Built-in effects: reverb, compressor, four-band EQ)
• A powerful offering for the price

Specifications

• Sampling Frequency: 44.1k / 48k / 88.2k / 96k / 176.4k / 192kHz
• Quantization Bit Rate: 16 / 24-bit
• Analog Audio Inputs
  • MIC IN (Balanced) 1-4 (when the input switch is set to MIC/LINE)
  • Connector: XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)
  • Input Impedance: 1.5kΩ
  • Nominal Input Level
    • GAIN: MAX: -64dBu (0.0005Vrms)
    • GAIN: MIN: -6dBu (0.388Vrms)
    • Maximum Input Level: +10dBu (2.45Vrms)
  • Gain Range: 58dB
• INSTRUMENT IN (Unbalanced): 1-4 (when the input switch is set to INST)
  • Connector: 1/4" (6.3mm) TS jack (Tip: HOT, Sleeve: GND)
  • Input Impedance: 1MΩ or more
  • Nominal Input Level
    • GAIN: MAX: -64dBV (0.0006Vrms)
    • GAIN: MIN: -6dBV (0.501Vrms)
    • Maximum Input Level: +10dBV (3.162Vrms)
  • Gain Range: 58dB
• LINE IN (Balanced) 1-4 (when the input switch is set to MIC/LINE)
  • Connector: 1/4" (6.3mm) TRS jack (Tip: HOT, Ring: COLD, Sleeve: GND)
  • Input Impedance: 10kΩ
  • Nominal Input Level
    • GAIN: MAX: -54dBu (0.0015Vrms)
    • GAIN: MIN: +4dBu (1.228Vrms)
    • Maximum Input Level: +24dBu (12.282Vrms)
  • Gain Range: 58dB
• Digital Audio Inputs
  • OPTICAL IN (S/MUX)
  • Connector: OPTICAL (JEITA RC-5720C)
  • Signal Format: Multi-channel Optical Format
  • (Supports S/MUX at 88.2k/96k/176.4k/192kHz)
• Analog Audio Outputs
  • MONITOR OUT (Balanced): LINE OUT 1-2
    • Connector: 1/4" (6.3mm) TRS jack (Tip: HOT, Ring: COLD, Sleeve: GND)
    • Output Impedance: 230Ω
    • Nominal Output Level: +4dBu (1.228Vrms)
    • Maximum Output Level: +20dBu (7.75Vrms)
  • LINE OUT (Balanced): LINE OUT 3-8
    • Connector: 1/4" (6.3mm) TRS jack (Tip: HOT, Ring: COLD, Sleeve: GND)
    • Output Impedance: 230Ω
    • Nominal Output Level: +4dBu (1.228Vrms)
    • Maximum Output Level: +20dBu (7.75Vrms)
  • HEADPHONE OUT PHONES 1-2
    • Connector: 1/4" (6.3mm) Stereo jack
    • Maximum Output Power: 45mW + 45mW (THD+N 0.1% or less, into 32Ω load)
  • Control Input/Output
    • USB
      • Connector: 4-pin, USB B type
      • Format: USB 2.0 HIGH SPEED (480Mbps)
    • MIDI IN
      • Connector: 5-pin, DIN
      • Format: Standard MIDI
    • MIDI OUT
      • Connector: 5-pin, DIN
      • Format: Standard MIDI
    • WORD IN
      • Connector: BNC
      • Input Voltage: 2.0Vpp to 5.0Vpp
      • Input Impedance: 75Ω ±10%
      • Frequency Deviation: ±100ppm
      • Terminal ON/OFF Switch: Equipped
    • WORD OUT
    • Connector: BNC
    • Output Voltage: 2.0Vpp (into 75Ω)
    • Output Impedance: 75Ω ±10%
    • Sampling Frequency: 44.1k / 48k / 88.2k / 96k / 176.4k /192k Hz
  • Power: DC12V (AC Adapter PS-P1220E included)
    • Power Consumption: 14W
  • Dimensions (W×H×D)": 11.65" × 2.56" × 6.30" / 296 × 65 × 160mm
  • Weight 3.53lbs. / 1.6kg
  • Operating Temperature Range: 41 to 95°F / 5 to 35°C
  • Audio Performance
    • Mic Amp EIN: -129dBu or lower
  • Frequency Response
    • Fs 44.1k/48kHz: 20Hz to 20kHz, +0/-0.4dB (JEITA)
    • Fs 88.2k/96kHz: 20Hz to 40kHz, +0/-0.8dB (JEITA)
  • Total Harmonic Distortion
    • MIC IN: 0.0016% (1kHz sine wave, GAIN knob at minimum, 20k SPCL LPF)
    • LINE IN: 0.0023% (1kHz sine wave, GAIN knob at minimum, 20k SPCL LPF)
  • Signal-to-Noise Ratio
    • MIC/LINE IN: 109dB (GAIN knob @ minimum, 20k SPCL LPF+A-Weight)
    • Crosstalk: 100dB or higher (MIC/LINE IN thru LINE OUT, 1kHz sine wave, Gain knob at minimum)
  • Computer System Requirements
  • Windows
    • Compatible Computers: Windows computer with a USB2.0 or USB3.0
    • CPU: Dual core (x86), 2GHz or faster
    • Memory: 2GB or more
    • Driver: USB Audio Class2.0, ASIO2.2SERIES 102i, WDM (MME), MIDI
  • Macintosh
    • Compatible Computers: Macintosh computer with a USB2.0 or USB3.0
    • CPU: Dual core, 2GHz or faster
    • Memory: 2GB or more
    • Driver: Core Audio, Core MIDI
  • iOS
    • Driver: Core Audio for iPhone
  • Supported OS'
  • Windows
    • Windows 10 (May 2019 Update) , Windows 8.1 , Windows 7
  • Mac
    • macOS Mojave , macOS High Sierra (10.13) , macOS Sierra‎ (10.12)
  • iOS
  • iPadOS New , iOS 12 , iOS 11 , iOS 10