Product Overview
Pliant Technologies' PBT-5BAY-01 is a 5-Bay battery charging station designed specifically for use with Pliant rechargeable Li-Poly batteries (TMA-BAT-02, sold separately) outside of the Radio Packs, BeltStations or MasterBelt (all sold separately). It can charge up to 5 batteries from empty to full in approximately 2.5 hours. It's an accessory to Tempest and CrewCom wireless products.
Includes
- PBT-5BAY-01 unit
- Power Supply with Power Cord (IEC 60320, US-type)
Specifications - Partial
- General:
- AC Input Connector: IEC60320 C14 (3-in)
- DC Input Connector: L712A Locking barrel
- DC Cable: Length 6ft
- Efficiency* > 80% at full load ROHS2002/95/EC
- *Power losses of input and output cables are not considered here.
- Green Procurement: WEEE2002/96/EC
- MTBF: >25000 hours at 25°C and full load per MIL HDBK 217F
- Indicator: Red-green bicolor LED per bay
- Battery Temp Monitoring: Read TEMP register (0x07 – 0x06) of BQ27000 in battery pack
- PCB Visibility: < 0.020” around perimeter of battery-mating connector
- RoHS COMPLIANCE: In compliance with the European Directive 2011/65/EC on the Restriction of Hazardous Substances (RoHS)
- Input:
- Voltage Range: 85–264 VAC
- Frequency Range: 50/60 Hz
- Input Current: 0.8 A max
- Standyby Power: 1 W max
- Input Fuse: N/A
- Output (per bay):
- Voltage: 0–4.2 V
- Current: 0–1 A
- Power: 6 W Maximum
- Voltage Tolerance: ± 1%
- Current Tolerance: ± 5%
- Leakage Current: < 1 mA
- Ripple and Noise*: < 120 mV pk-pk
- *Measured with a 0.1µF ceramic capacitor and a 47µF Tantalum capacitor across the output terminals.
- Protection: Short circuit, Over temperature, Reverse polarity, 4-hr time limit
- Environmental:
- Cooling: Convection
- Operating Temperature: 0° C to 40° C
- Non-Operating Temperature: -40 °C to 70 °C
- Note: further specifications available within the "PBT-5BAY-01 Datasheet" located under the "Documentation" tab above.