Doug Fleenor Design PRE10E-A 10-Button 2 Gang Wall Mounted DMX Controller with Ethernet

Playback sACN (E1.31) snapshots from four universes with the PRE10E-A Ethernet Architectural control wall station. Record up to ten static snapshots from any sACN capable console, allowing you to control 2048 individual slots with the push of a single preset button. This simple interface also contains various lockout topologies, keeping functionality safe and simple for untrained users. Configure from the rear facing user interface and power via Power over Ethernet (PoE-802.3af) or an optional 24-48VDC power input. The PRE10E-A is compatible when multiple stations are used in the same universe and able to operate on the same Local Area on different universes for additional versatility in this sleek unit.

Features

• Reside multiple stations on the same network (in “Main & Remote” relationship or as completely independent devices)
• Power via POE or by a separate low voltage power supply
• Fully self-contained station (does not require a separate processor device or central control unit)
• Fade times adjustable from 0 to 999 seconds for each preset
• Fits in a standard 2-gang back box

Specifications

• Input: E1.31 sACN – 4 Universes – 10/100 Mbps Ethernet
• Output: E1.31 sACN – 4 Universes – 10/100 Mbps Ethernet
• Connector: RJ45
• Indicators:
  • Ten Green Illuminated Button Caps
  • One yellow Fade time LED
  • One red Signal/Record LED
• User Controls:
  • Ten Preset Select Buttons
  • One Recessed Record Button
  • One Recessed Fade Time Button
  • One Rotary Encoder with Knob
  • One Graphical LCD Screen
• Options Jumpers: All jumpers installed at ship time
• Power Input: 802.3af Power over Ethernet or Auxiliary 24-48 VDC 150mA
• Color: Black anodized with silver engraved nomenclature
• Size: Faceplate: 4.5” X 4.6" X 0.2”
• Faceplate rear inset: 4.15” X 4.25” X 0.1”
• Electrical box minimum inside dimensions: 3.6” X 2.9” X 1.4”