Product Overview
Ashly's NX Multi-Mode Power Amplifiers are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers in a single rack unit. This model, the nXe752BD comes with the following factory installed digital input options: an Ashly OPDAC4 Internal 4-Channel DAC (Digital to Analog Converter) Option Card and an Ashly OPDante® module that is capable of transmitting Dante® digital audio from their post-DSP input channel signals.
Available in three amplifier series, NX offers 2 or 4-channel models as NX (base model series), NXE (networkable), or NXP (networkable + DSP). This model, the nXe752, is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power that fits into a 1U sized unit.
NOTE: Actual product may vary in appearance and specification. For more information on this and other products, please contact your Sales Pro.
Includes
- Class-D Switching Amplifier Technology
- Multi-Mode Operation
- Energy Efficiency
- Ethernet Control using Protea™ NE software
- Real-Time Clock with Event Scheduler
- Ashly Remote Control via iPad® app
- 32-bit SHARC DSP Processing at 48kHz or 96kHz Sample Rates
- FIR Filter-Ready
Features
- Selectable 80Hz 2nd-order Hi-pass filter, limiter, and input gain perchannel
- Remote DC level control per channel
- Extensive protection circuitry, continuously variable cooling fan
- Ethernet port for software control and monitoring of amplifierfunctions,with front panel COM activity LED
- Serial data port available for Ashly WR-5 and RD-8C programmable remotecontrol (optional RS-232 converter INA-1 available for third partycontrollers)
- Instant Standby Mode, 40% reduction in idle power consumption, triggeredby contact closure, software control, or event scheduler
- Preset recall via contact closure, software control, remote control, orevent scheduler
- Programmable power-on delay
- Aux preamp line outputs for driving other amplifiers
- Fault condition logic outputs per channel
- Comprehensive software controlled DSP including dynamics, gain,equalization, matrix mixer, crossover, delay, and metering.
- Additional iPad control of select DSP functions including gain, matrix,A/Bsource select, PEQ filter level, and meters
- Precision swept load impedance monitoring of individual amplifier channelsfor remote diagnosis of speaker problems
- Signal generator function for test and noise masking
- Remote gain and zone control with neWR-5 and FR-8/FR-16 programmablenetworked remotes
- Euroblock input connectors
- Euroblock loudspeaker connectors
- Detachable AC mains line-cord connector
- Safety/Compliance: cTUVus (pending), CE, FCC, RoHS
Specifications
- NOTE:
- Voltage Gain: Selectable at 26dB, 32dB, 38dB, or 1.4V
- Damping Factor: >250 (8 Ohm load
- Input High Pass Filter: 80Hz 2nd order
- Distortion (SMPTE, typical):
- Distortion (THD-N, typical):
- Channel Separation: -75dB (dB from full output, 1kHz)
- Signal-to-Noise (unweighted) 20Hz-20kHz, Gain @ 26dB:
- >99dB (all 150x models)
- >96dB (all 75x models)
- Frequency Response: 20Hz-20kHz, +/-0.05dB
- Balanced Input Connector: Euroblock 3.5mm
- Input Impedance: 10k Ohms
- Maximum Input Level: +21dBu
- Speaker Output Connector: Euroblock 7.62mm
- Control Network: RJ-45 connector, 100MB Ethernet
- AUX Output Connector: Balanced Euroblock 3.5mm
- AUX Output Maximum Level: +21dBu
- Remote Standby Contact Closure: Euroblock 3.5mm,close contact pin toground (G) for standby mode
- Preset Recall Contact Closure: Euroblock 3.5mm, close contact to ground(G) for preset 1-4 recall
- Data Connection: Euroblock 3.5mm – Gnd, +18V, Data Out, Data In
- Fault Condition Logic Outputs: Euroblock 3.5mm –fault indicated by lossof1Hz "heartbeat" pulse signal
- Remote DC Level Control: Euroblock 3.5mm – Gnd, CV,V+ per input
- Attenuators (per channel): Rear panel, software, offset link group, remotecontrol. Fully off = Mute
- Amplifier Protection: Shorted output power limiting, over-temperature,DC-output, power-supply fault, mains-fuses & in rush-current limiting
- Cooling: Continuously variable temperature controlled fan
- Environmental: 32°F-120°F (0°C-49°C) non-condensing
- Power Requirements (50 – 60Hz):
- Nominal Voltage Input: 100 – 240VAC
- Operating Range: 70 – 270VAC
- Minimum power-up: 70VAC
- Power Supply Type: SMPS with active PFC (Power Factor Correction)
- AC Mains Line Cord Connector: Detachable Nema 5-15 for USA (May vary for export)
- Weights and Dimensions:
- Unit Dimensions (WxHxD): 19” x 1.75” x 14.54” (483 x 45 x 369mm)
- Shipping Dimensions (WxHxD): 25.2" x 2.5" x 19.5" (641 x 64 x 495mm)
- Unit Weight: 13.1lbs (5.9kg)
- Shipping Weight: 16.0lbs (7.3kg)