Sennheiser HMD 301 PRO Single-Ear Pro Broadcast Monitoring Headset

The HMD 301 is a broadcast monitoring headset from Sennheiser that delivers superb sound with a comfortable fit for those long production days. It's a single-ear headset that features a soft, notched headband, which provides lower wearing pressure. A recently-developed ear pad includes a comfort zone to reduce pressure when wearing glasses, while still delivering an excellent seal for high passive noise attenuation. It has acoustic elements that have been engineered to deliver maximum audio detail and intelligibility, even in the most demanding production environments. Its ultra-linear drivers–recently developed by Sennheiser–offer clear, natural, distortion-free sound, while an on board supercardioid, dynamic boom mic captures incredibly-detailed speech. Sennheiser's proprietary ActiveGard™ peak level protection can also be activated to provide hearing protection for from excessive sound levels and peaks above 110dB.

• HMD300PRO Headset
• ActiveGard (on/off switch) for protected hearing against noise peaks > 110dB
• HEADPHONES

Note: Cable sold separately.

• Wind and pop screen
• Highest resolution due to accurate, linear sound reproduction, optimized for speech intelligibility
  • Transducer Principle: Dynamic, Closed
• Quick Start Guide
• Dynamic, noise-compensated supercardiod microphone for clear communication even in noisy environments
  • Ear Coupling: Circumaural
• Safety Guide
• Microphone can be worn either on right or left hand side
  • Frequency Response: 60Hz – 25kHz
• Comfortable padding design allows for extended use in long wearing sessions
  • Impedance: 64Ω
• Superior ambient noise attenuation in loud environments due to closed passive earcup construction
  • Power Rating: 500mW
• Due to our established modular concept, cable 26-II series cables are compatible (sold separately)
  • Sensitivity: 108 ±3dB SPL/1Vrms /1kHz
• Foldable earcup design for space saving storage
  • Maximum SPL: 123 dB SPL @ 1kHz
  • 110dB SPL @ 1kHz (ActiveGard™ on) ActiveGard™ equipped models only
  • WBCV 0.308 Vrms
  • Ambient Noise Reduction (passive): Max 32dB
  • Distortion < 0.1% @ 1kHz, 100dB SPL
  • Contact Pressure: 6.0N ± 0.75N (distance of 140mm, after 10 min., slider arms moved out for 5 clicks)
  • Ambient Temperature:
    • Operation: -15°C to +55°C
    • Storage: -55°C to +70°C
  • Relative Humidity: ≤90% @ 40°C
  • Weight without cable (approx.):319g
• BOOM MICROPHONE
  • Transducer principle: Dynamic, supercardioid
  • Frequency response: 80Hz – 16kHz
  • Output Voltage: 0.4mV/Pa @ 1kHz
  • Impedance: 300Ω
  • Audio adjustment range: 45dB, adjustable in 5 dB steps