Audix M3G6 MIC, TRI-ELEMENT, HANGING, GREY 6' FOOT

Aesthetics and quality meet in the M3 Tri-element hanging microphone system. This innovative audio solution incorporates three phase coherent hypercardioid capsules with tailored frequency responses, ideal for environments where speech clarity is critical. Break through undesired noise in meeting rooms and classroom—the M3's low noise preamp circuitry creates studio quality sound with the highest possible signal to noise ratio, while high quality silicone jacketed microphone cable maintains a balanced, shielded signal. Adjustable cable and the low impedance design allow for optimized installation and usability from video conferencing to courtrooms and medical facilities.

M3G6 is easily installed with plenum rated junction box JBM3 (sold separately) and connects to the input of a mixer or dsp console via breakout cable CABLM3TERM or a variety of shielded CBLM3 CAT 7 cables available in lengths up to 325 ft. (sold separately).

Includes

• Charcoal Grey Microphone
• 6 ft. Charcoal Grey Cable

Features

• 100% RF shielding and gold diaphragm condenser capsules
• Very high output, low self-noise
• Evenly dispersed sound with undetectable phase
• Adjustable length silicone jackets microphone cable
• Easy to install with JBM3 or CBLM3TERM (sold separately)

Specifications

• Transducer Type: Pre-Polarized Condenser
• Frequency Response: 30 Hz – 19 kHz
• Optimized Response: 70 Hz – 9 kHz
• Polar Pattern: Hypercardioid
• Output Impedance: 150 Ohms balanced
• Sensitivity: 34 mV / Pa @ 1k
• Off Axis Rejection:
  • 1 capsule >23 dB at 180º relative to 0º
  • 2 capsules >18 dB at 120º
  • 3 capsules >9 dB at 60º
• Signal/Noise Ratio (A-weighted): 72 dB
• Equivalent Noise Level (A-weighted): 22 dB (A weighted)
• Maximum SPL @ .5% THD: ≥128 dB
• Dynamic Range: 106 dB
• Power Requirements: 18 – 52 Volts phantom
• Cable/Connector: Terminal block or XLR
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
• Dimensions: 2" diameter x 1.2" width
• Weight: 3.32 oz.
• *TAA compliant

Note

M3G6 requires the following for installation: JBM3 and CABLM3TERM or CBLM3xx CAT7 cable available in lengths up to 325 ft.

Installation needs are sold separately, please contact your Full Compass Sales Pro for assistance.