RED Digital Cinema 720-0039 DSMC2 JETPACK Expander

The DSMC2® Jetpack Expander from RED is specifically designed for aerial, gimbal, handheld, and other lightweight/remote configurations. This expander features standard connectors for power (DC-IN), CTRL, and SYNC for all of your Timecode and Genlock needs. In addition, the DSMC2 Jetpack Expander offers custom-tailored supports and connectors for HDMI and USB power out—perfect for housings and low-profile setups.

The DSMC2 Jetpack Expander also features a selector switch that enables the DSMC2 BRAIN® to automatically boot when power is provided via the DC IN connector on the expander. This feature allows you to use a connected DC input supply to turn the BRAIN on and off when the camera is mounted in remote or difficult to maneuver locations. The DSMC2 Jetpack-SDI Expander is also available, featuring an SDI output and GIG-E support for many aerial or other applications. Please remember that only one (1) expander module can be used at a time.

The DSMC2 Jetpack Expander is compatible with the following RED offerings:

• DSMC2 MONSTRO
• DSMC2 HELIUM
• DSMC2 GEMINI
• WEAPON 8K VV
• WEAPON 8K S35
• WEAPON 6K
• EPIC-W
• SCARLET-W
• RAVEN

RED Digital Cinema 720-0039 Specifications:

• SKU: 720-0039
• Dimensions:
  • Height: 4.57 in. (116 mm)
  • Width: 3.54 in. (90 mm)
  • Depth: 1.46 in. (37 mm)
  • Weight 0.50 lbs (226.8 g)
• Material: Magnesium
• BRAIN Mounting: 4x M4 captive mounting screws
• BRAIN Connections:
  • Power delivery via DSMC2 Rear pogo connector (13-Pin)
  • Communication via DSMC2 Rear I/O connector (4×40 Pin)
• Connectors:
  • DC IN (6-Pin 1B LEMO socket)
  • HDMI 1.2 output (Type A socket), 60 Hz max frame rate
  • USB Power output (Type A socket), 1.0 A
  • SYNC (Genlock IN / Timecode IN / Sync IN) (4-Pin 00B LEMO socket)
  • CTRL (Tally OUT / RS-232 Rx and Tx) (4-Pin 00B LEMO socket)
• Auto Boot On Power: 2-position slider switch
• Operating Temperature: 32°F to 104°F (0°C to 40°C)
• Storage Temperature: –4°F to 122°F (–20°C to 50°C)
• Operating Humidity: 0% to 85%, non-condensing
• Storage Humidity: 0% to 85%, non-condensing
• Firmware Requirement: Compatible with all DSMC2 firmware versions

Tech specs reflect both current and projected information. Everything is subject to change.

Some gear shown above are NOT INCLUDED and sold separately. For more information on this and other products, please contact your Sales Pro.