RED Digital Cinema 720-0045 DSMC2 Base I/O V-Lock Expander

The DSMC2® V-Lock I/O Expander offers a variety of Input/Output connections, as well as an industry standard V-Lock mount to power your DSMC2 camera using RED BRICK® batteries. Constructed from lightweight and durable magnesium, this expander module mounts directly to the rear of the camera BRAIN® and offers connections for the following:

• DC Power input (DC IN)
• HDMI 1.2 output (Type A socket)
• 3G-SDI output (HD-SDI, 75 O BNC)
• CTRL & SYNC ports (2x 00B LEMO 4-Pin, Timecode and Genlock support)
• AUX Power output (P-Tap 2-Pin female)
• USB Power output (Type A, 5 V at 1.5 A for powering HDMI transmitters or small mobile devices)
• Stereo Headphone output (3.5 mm jack)
• Stereo Analog input (3.5 mm jack)

The DSMC2 V-Lock I/O Expander also features a selector switch that enables the BRAIN to automatically boot when power is provided via the DC IN connector on the expander. This feature allows you to use a connected DC input supply to turn the BRAIN on and off when the camera is mounted in remote or difficult to maneuver locations.

This expander is an ideal solution for a wide variety of production environments—from low-profile run-and-gun situations to studio shoots that require mobility.

NOTES:

• The DSMC2 Top Handle is NOT fully compatible with the DSMC2 Base I/O V-Lock Expander, as the top handle will interfere with the battery when one is attached to the expander module.
• Only one (1) expander module can be used at a time.

RED DSMC2 V-Lock I/O Expander Compatibility:

• DSMC2 MONSTRO
• DSMC2 HELIUM
• DSMC2 GEMINI
• WEAPON 8K VV
• WEAPON 8K S35
• WEAPON 6K
• EPIC-W
• SCARLET-W
• RAVEN

RED Digital Cinema 720-0045 Specifications:

• SKU: 720-0045
• Dimensions:
  • Height: 4.57 in. (116.0 mm)
  • Width: 4.94 in. (125.5 mm)
  • Depth: 2.25 in. (57.2 mm) (connected to BRAIN)
  • Weight 1.0 lb (454 g)
• Material: Magnesium
• BRAIN Mounting: 4x M4 captive mounting screws
• BRAIN Connections:
  • Power delivery via Rear pogo connector (13-Pin)
  • Communication via Rear I/O connector (4×40 Pin)
• Connectors:
  • DC IN (6-Pin 1B LEMO socket)
  • 3G-SDI output (75 O BNC), 60 Hz max frame rate
  • HDMI 1.2 output (Type A socket), 60 Hz max frame rate
  • Sync (Genlock IN / Timecode IN / Sync IN) (4-Pin 00B LEMO socket)
  • CTRL (Tally OUT / RS-232 Rx and Tx) (4-Pin 00B LEMO socket)
  • USB Power output (Type A socket), 1.5A
  • P-Tap Aux Power output (2-Pin), 3.0A
  • Stereo Analog Microphone input (3.5mm jack)
  • Stereo Headphone output (3.5mm jack)
• Auto Boot On Power: 2-position slider switch
• Battery Compatibility: RED BRICK
• Audio: 24-bit, 48 KHz, uncompressed, unbalanced mic level
• Operating Temperature: 32°F to 104°F (0°C to 40°C)
• Storage Temperature: –4°F to 122°F (–20°C to 50°C)
• Operating Humidity: 0% to 85%, non-condensing
• Storage Humidity: 0% to 85%, non-condensing
• Firmware Requirement: Compatible with all DSMC2 firmware v6.2.17 or later.

NOTE: Some gear shown above are NOT INCLUDED and sold separately. For more information on this and other products, please contact your Sales Pro.