Product Overview
The Crestron Saros® SB-200-P, designed for a flat panel display, is a stereo sound bar that provides enhanced audio performance. Its full-range, front-firing speakers offer an improvement over the small, rear-facing speakers typical of many display devices. The bracket included with the sound bar allows for attachment to a wall surface, or the unit can be placed on a shelf below or above the display. Built-in amplification allows for direct connection to the line-level audio output of the display device, or to the output of an audio preamp, switcher, mixer, tv tuner, codec, or Crestron DM® receiver. The amplifier powers on automatically when an audio input signal is detected, and powers off if no signal is detected for several minutes. This sound bar is ideally suited for use with the Crestron RL® 2 Group Collaboration System and other unified communication and videoconferencing systems.
Crestron Saros SB-200-P Applications:
- Hotel
- Restaurant
- Museum
- Medical center
- Airport
- Office building
- Residence
Crestron Saros SB-200-P Features:
- High-quality, full-range amplified stereo sound bar
- Delivers enhanced sound quality and performance for use with any flat panel display
- Mounts to a wall or sits on a shelf
- Balanced or unbalanced stereo line-level audio input
- Unbalanced stereo audio cable included
- Powers on and off automatically
- 100 to 240 Volt AC powered
Crestron Saros SB-200-P Specifications:
- Performance
- Woofers: (2) 3 inch (76 mm) polypropylene cone w/rubber surround
- Passive Radiators: (2) 3 x 4-3/8 inch (76 x 112 mm) polypropylene cone w/rubber surround
- Tweeters: (2) 1 inch (25 mm) polyester dome
- Amplifier Power: 20 Watts per channel, stereo
- Frequency Response: 100 Hz to 20 kHz (±3 dB)
- Output Sensitivity: 83 dB SPL @ 1 meter, both channels driven @ 1 Watt each
- Input Sensitivity: 0.75 Vrms per channel for full rated output
- Go To Sleep Time: 20 minutes (±5 minutes) with no signal present
- Wake Threshold: 5 mV (±2 mV) typical
- Connectors
- Balanced Audio Inputs:
- (1) 5-pin 3.5 mm detachable terminal block
- Balanced stereo line-level audio input
- Maximum Input Level: 0.85 Vrms
- Input Impedance: 10k Ohms
- Unbalanced audio inputs:
- (2) RCA connectors, female
- Unbalanced stereo line-level audio input
- Maximum Input Level: 0.85 Vrms
- Input Impedance: 10k Ohms
- 100-240V~50/60Hz 50W:
- (1) IEC 60320 C8 main power inlet
- Mates with removable power cord, included
- Control & Indicators
- 100-240V~50/60Hz 50W: (1) Rocker switch, turns main power on or off
- PWR: (1) Blue LED, indicates the main power switch is turned on
- Power Requirements
- Main Power: 50 Watts (500 mA maximum) @ 100-240 Volts AC, 50/60 Hz
- Environmental
- Temperature: 41° to 104° F (5° to 40° C)
- Humidity: 10% to 90% RH (non-condensing)
- Construction
- Enclosure: Plastic housing with perforate metal grille, black
- Mounting: Freestanding or wall mount (bracket included)
- Dimensions
- Height: 4.18 in (106 mm)
- Width: 40.60 in (1031 mm)
- Depth: 2.78 in (71 mm);
- 2.96 in (76 mm) with wall mount bracket
- Weight: 7.8 lb (3.6 kg)
- NOTE: The SAROS SB-200-P has a fixed input level. It must be connected to an audio source equipped with adjustable audio output level.
- NOTE: Right-angle plugs may be required for wall mount applications. A 59 inch (150 cm) right-angle RCA to straight RCA stereo cable is included.
