AMX NMX-DEC-N3232 H.264 Compressed Video over IP Decoder

This stand alone H.264 Compressed Video over IP Decoder - the NMX-DEC-N3232 from AMX - is ideal for quality streaming over low bit rate WAN. With this N3X32 Video over IP model it allows you to extend the reach of you r Networked AV solution to the WAN for streaming, video to desktop, digital signage, set-top boxes, cloud, or mobile device applications. Fully integrated with existing Networked AV control options, the N3X32 Series delivers the highest quality HD video content at the lowest bandwidth for the most demanding applications including distance education, Multi-Site Enterprise, and IPTV Streaming.

The N3000 Series H.264 compression engine delivers low-latency 1080p60 video at half the bandwidth of comparable encoders. High profile H.264 encoders output unicast or multicast to one or more N3000 Series decoders. Multiple selectable streaming protocols (RTP, RTSP, and more) allow for software endpoints during video to the desktop applications or third-party hardware endpoints like Roku, Amino, or Google TV. Adjustable bit-rates from 32-Kbps to 10-Mbps give the highest video fidelity at the lowest bandwidths on the market in keeping with SVSI's commitment to provide unsurpassed Networked AV quality.

The N3000 Video over IP Series extends the reach of SVSI's Networked AV solutions to the WAN for streaming, video to desktop, digital signage, set-top boxes, or mobile devices applications. Fully integrated with existing Networked AV control options, the N3000 Series delivers the highest quality HD video content at the lowest bandwidth for the most demanding applications. Moving video to or from the Cloud just became a lot easier with the N3000.

AMX NMX-DEC-N3232 Features:

• Power Over Ethernet (PoE) – Eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, high-density installations
• Infrared (IR) – Infrared emitter connection allows control of low-cost, IR-only display devices
• Onboard Control – All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices
• Unlimited Scalability
• Stand Alone or Card – Available as a stand alone device, or card for use with NMX-ACC-N9206

AMX NMX-DEC-N3232 Specifications:

• Part #: FGN3232-SA
• Video:
  • Video Input: Network video over copper via RJ45 port or fiber via 1G SFP port
  • Video Output: HDMI, DVI-D (through adapter)
  • Formats: HDMI, DVI-D (through adapter), HDCP content protection support
  • Input Resolutions:
  • Supports most common HD up to 1080p60.
  • *720x480 @ 59Hz, 640x480 @ 60Hz, *720x480 @ 60Hz, *720x576 @ 50Hz, 800x600 @ 56Hz, 800x600 @ 60Hz, *1280x720 @ 50Hz, *1280x720 @ 59Hz, *1280x720 @ 60Hz,
  • 1024x768 @ 60Hz, 1280x800 @ 60Hz, 1440x900 @ 60Hz, 1680x1050 @ 60Hz, 1920x1080 @ 24Hz, 1920x1080 @ 25Hz, 1920x1080 @ 29Hz, 1920x1080 @ 30Hz, *1920x1080 @
  • 50Hz, *1920x1080 @ 59Hz, *1920x1080 @ 60Hz, *1920x1080i @ 50Hz, *1920x1080i @ 59Hz, *1920x1080i @ 60Hz
  • Audio:
    • Input Signal Types: Network audio over Ethernet
    • Output Signal Types: Embedded audio on HDMI or DVI-D (through adapter)
    • HDMI Audio Formats: Stereo 2-channel
    • Analog Audio Formats: Stereo 2-channel
  • Latency:
  • Latency: 175 ms at 60 fps
  • This is the combined encode plus decode latency.Total latency from source to screen will also include any network latency.
  • Scaling adds one frame of latency (17ms at 60fps)
• Communications:
  • Ethernet:
    • P0: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
    • P1: 1 Gbps port which accepts compatible fiber transceivers or direct attach cables (fiber or copper cabling)
    • HDMI: HDCP, EDID management
  • Ports:
    • +12V 2A: One 12 Volt DC power input
  • P0:
    • 8-wire RJ45 female
    • 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
    • Provides network connection, network AV video, and power to the Encoders and Decoders
  • P1:
    • SFP port (SFP fiber transceiver or direct attach cable not included)
    • Provides the network connection and network AV video
  • IR:
    • 2-pin terminal Phoenix connector
    • Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included) RS232
    • 3-pin terminal Phoenix connector
    • Provides a serial control interface. Full duplex communication. Available terminal speed settings: 1200-115200 baud rate
  • Audio:
    • 5-pin terminal Phoenix connector
    • Provides user-selectable balanced/unbalanced output. Dedicated audio output
  • HDMI Out: HDMI video output
  • USB connectors (front panel): One USB-A control inputs
  • Environmental:
    • Temperature: 32° to 104°F (0° to 40°C)
    • Humidity: 10% to 90% RH (non-condensing)
    • Heat Dissipation: Up to ~44 BTU/Hr
  • General:
  • Dimensions (H x W x D): 1.05" x 7.888" x 5" (2.67 cm x 20.04 cm x 12.7 cm)
  • Weight: 1.54 lbs (0.7 kg)
  • Regulatory Compliance: FCC, CE, and NTRL