Product Overview
ETC's ColorSource® PAR Pearl is a variable white-light LED wash luminaire that utilizes a mix of two different white LEDs. This allows the user to set the color temperature anywhere between 2700 K and 6500 K. The Pearl array includes the same great feature set and high quality construction as its full color sibling, including an impressively bright output and simple user interface. This model features a black housing a comes with your choice of termination - Edison, stage pin, Twist-Lock or bare end.
Designed for installations that depend heavily on white light such as studios, houses of worship, and architectural installations, this array features flicker-free operation and an impressively smooth dimming curve.
ETC ColorSource PAR Pearl Features:
- Variable CT from 2700 K to 6500 K
- Homogenized optics
- Simple user interface with seven-segment display
- powerCON in and thru power connections
- DMX/RDM in and thru (5-pin XLR)
- LED droop compensation for consistent output
- Optically calibrated
- Tour-ready, aluminum housing
ETC ColorSource PAR Pearl Specifications:
- Part Number: CSPARPRL
- General:
- IP20-rated for indoor use
- Power- and DMX-in/thru connections for simple setup
- 7-segment, 3-button interface
- (12) onboard, customizable presets
- Physical:
- Rugged, die-cast, aluminum and plastic housing
- Color: Black
- Hanging yoke and power cable included
- Dimensions (HxWxD)*: 12.2" x 7.98" x 9.45" (310 x 203 x 240 mm)
- *Note: Excluding mounting hardware.
- Product Weight*: 8.3 lbs (3.77 kg)
- Shipping Weight: 10.1 lbs (4.59 kg)
- Electrical:
- 100VAC to 240VAC 50/60Hz universal power input
- powerCON in and thru power connections
- Up to 10 luminaires total per 20A switched circuit when used with ETC R20 relay module or similar equipment
- -- Consult breaker trip curves when used with other equipment
- Inrush: 35A (first half-cycle) at 120V
- Wattage: 114W typical, 1.6W standby at 120V
- Current draw: 0.96A at 120V
- Source*:
- 36,000-hour LED life (at 70% intensity)
- 40 Luxeon® Z LED emitters
- 5,709 max lumens
- 50 lumens per watt
- *See additional LED notes and photometrics in the data sheet located under "Documentation" tab.
- Color:
- Warm white, cool white
- 2700 K - 6500 K color temperature range
- Calibrated array
- Optical:
- 15° beam angle
- Aperture size: 7.5" (190 mm)
- Camera flicker control: 1.2 kHz (default) and 25 kHz (via RDM)
- Secondary lenses available for multiple beam-spread options (sold separately)
- Control:
- DMX512 in and thru via 5-pin XLR or RJ45 connectors
- Supports DMX and RDM protocols
- RDM support for address and setting changes
- Modes (footprint):
- Variable color temperature: ICt (2)
- Direct: IWCS (4)
- Single channel: I (1)
- RDM configuration
- 7-segment address display
- Local control of 12 presets
- Thermal:
- Luminaire is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housing
- Ambient operating temperature of 32° to 104°F (0° to 40°C)
- Active electronic thermal management using variable-speed fan
- 24.8dBa average at 1m
- 389 BTUs/hour
