Product Overview
The ATW-1377 is part of Audio-technica's System 10 PRO Rack-Mount digital wireless lineup, and includes an ATW-RC13 rack-mount receiver chassis, (2) ATW-RU13 receiver units, and (2) ATW-T1007 microphone desk stand transmitters.
System 10 PRO Rack-Mount
Providing the same interference-free operation in the 2.4 GHz range (outside the TV bands) as the original System 10 wireless system, the System 10 PRO Rack-Mount system further expands upon the original's features and versatility. Among those features is a durable half-rack chassis equipped to house 2 receiver units that can be operated locally -or- released from the chassis and mounted in a remote location (up to 328 feet away) via Ethernet cable. Up to 5 chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with simultaneous use of up to 10 channels (additional chassis and receiver units sold separately).
Like all System 10 wireless products, the PRO Rack-Mount includes quality features like 24-bit operation, easy setup, clear and natural sound quality, and 3 levels of diversity assurance – Frequency, Time, and Space:
- Frequency Diversity sends the signal on 2 dynamically-allocated frequencies for interference-free communication
- Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference.
- Space Diversity uses 2 antennas on each transmitter and receiver unit to maximize signal integrity
Includes
- (1) ATW-RC13 rack-mount receiver chassis, with:
- Power supply
- AC adapter
- Link cable
- Rack-mount adapters
- Joining plate
- Rubber feet
- (2) ATW-RU13 receiver units, with:
- Antennas
- AT8690 RU13 holder
- (2) ATW-T1007 microphone desk stand transmitters, with:
- AC Adapter (USB-type)
- USB charging cable
Features
- Overall System:
- Digital 24-bit / 48 kHz wireless operation for ultimate sound quality and dependable performance
- Operates in the 2.4 GHz range – completely free from TV interference
- Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
- Up to five chassis (ten receiver units) can be linked and used simultaneously - all additional units sold separately
- Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
- Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level and system link status
- Automatic frequency selection for seamless, interference-free operation
- Extremely easy operation with instantaneous channel selection, sync and setup
- Three levels of diversity assurance: frequency, time an space
- Ground-lift switch helps eliminate audible hum caused by ground loops
- ATW-T1007 Microphone Desk Stand Transmitter:
- Pairs with any System 10 or System 10 PRO digital wireless receiver
- 3-pin XLRF-type in for quick mounting of gooseneck microphone
- Digital 24-bit / 48 kHz wireless operation for ultimate sound quality and dependable performance
- Operates in the 2.4 GHz range – completely free from TV interference
- User switch can be set to toggle between talk and mute modes, or function as a press-to-talk or press-to-mute button
- Gain Control switch allows selection of three input gain levels: -6 dB (for loudest voices), 0 dB and +6 dB (for softest voices)
- Two red/green LEDs – one visible from the front of the unit, the other from the rear – indicate toggle/talk/mute mode, battery level, and charging status
- Switchable low-cut filter
- System ID Display located on bottom of unit
- Automatic frequency selection for seamless, interference-free operation
Specifications
- Overall System:
- Operating Frequencies: 2.4 GHz ISM band (2400 to 2483.5 MHz)
- Dynamic Range: > 109 dB (A-weighted), typical
- Total Harmonic Distortion: < 0.05% typical
- Operating Range: 200ft (60m), open range env. with no interfering signals
- Operating Temperature Range: 32 °F to 104 °F (0 °C to +40 °C), battery performance may be reduced at very low temperatures
- Frequency Response: 20 Hz - 20 kHz
- Maximum Simultaneous Use (Recommended): 200ft minimum
- ATW-RC13 Receiver Chassis:
- Maximum Output Level:
- XLR, balanced: 0 dBV
- ¼" (6.3mm), unbalanced: +6 dBV
- Power Supply: 100 - 240 VAC (50/60 Hz) to 12 VDC, 0.5 A, power supply switched mode external
- Dimensions (W x H x D): 8.26" x 1.73" x 6.67" (209.8 x 44 x 169.3mm)
- Net Weight: 33.2 oz. (940 g)
- Remote receiver connector: RJ45
- ATW-RU13 Receiver:
- Receiving System: Diversity (frequency/time/space)
- Remote Receiver Connector: RJ-45
- Mounting Thread Insert: ¼" x 20
- Dimensions (W x H x D): 2.24" x 0.75" x 3.06" (57 x 19 x 77.6mm)
- Net Weight: 2.3 oz. (64 g)
- ATW-T1007 Microphone Desk Stand Transmitter:
- RF Power Output: 10 mW
- Spurious Emissions: Following federal and national regulations
- Power Supply: 100 - 240 VAC (50 / 60 Hz) to 5 VDC, 0.5 A, switched mode external USB-type power supply
- Battery: 3.7 V rechargeable lithium-ion battery
- Battery Life: 9 hours
- Charging Time: Approx. 4.5 hours (for 0 - 100% charge)
- Switches: Touch-sensitive, capacitive-type user switch function: toggle (talk on power up), momentary on, momentary off; Low-cut filter: flat, roll-off; Gain: -6 dB, 0 dB, +6 dB
- Dimensions (W x H x D): 3.81" x 1.74" x 4.83" (96.8 × 44.2 × 122.8mm)
- Net Weight: 14.8 oz. (420 g)
- Accessories Included: AC Adapter (USB-type), USB charging cable
- Note: further information can be found within the items located under the "Documentation" tab above.
