Interactive Technologies ST-UP2-CA-LG Ultra Series Passive 2-Button Network Station in Light Almond with Green LED Indicator

The ST-UP2-CA-LG from Interactive Technologies is a member of their Passive 2 Button Digital CueStation lineup. This version is an Ultra Series Passive 2 Button Station that comes in a light almond finish with green LED indicators.

Passive CueStations provide dry-contact switch closures for direct connection to devices that are expecting a contact closure to activate an event. There is a single terminal for each switch plus an extra terminal which is the "switch common" on the back of the station. For example, on a six button station, seven conductors would be needed (the six switches, plus one common).

The Passive CueStation is designed to be directly connected to the contact closure inputs and digital output ports of a CueServer processor, however, these stations can be used in a wide variety of custom applications as well.

The LED indicators on a Passive station are wired similarly. Each LED has a single terminal on the back of the station, plus an additional terminal for the LED common. By default, the LEDs are wired with all of the positive (+) leads tied together as the LED common and the negative (-) leads are all separately wired to the LED terminals. This allows the LEDs to be controlled by a switched-to-ground connection for each LED. The station includes LED current limiting resistors normally set up for 5VDC operation.

Interactive Technologies ST-UP2-CA-LG Features:

• Simple terminal blocks for discrete switch and LED wiring
• Green LED indicators
• Indicators are current-limited for use with 5-12 VDC power
• Can be used directly with CueServer's digital I/O ports

Note

NOTE: Product shown in image is for illustrative purposes only. Actual product may vary in appearance.

NOTE: See Attached for Product Specifications