IK Multimedia IRIG-STOMP-I/O iRig Stomp I/O USB Pedalboard Controller/Audio Interface for iOS, Mac, PC

OUR PART #: IRIG-STOMP-I/O MFR #: 275361

Copied to clipboard

The IK Multimedia iRig Stomp I/O is a USB pedalboard controller that integrates a professional, high-resolution, MFi certified audio interface with MIDI input/output for iPhone... ...Read more

IK Multimedia IRIG-STOMP-I/O IRig Stomp I/O USB Pedalboard Controller/Audio Interface For IOS, Mac, PC Image 1
IK Multimedia IRIG-STOMP-I/O IRig Stomp I/O USB Pedalboard Controller/Audio Interface For IOS, Mac, PC Image 2
IK Multimedia IRIG-STOMP-I/O IRig Stomp I/O USB Pedalboard Controller/Audio Interface For IOS, Mac, PC Image 3
IK Multimedia IRIG-STOMP-I/O IRig Stomp I/O USB Pedalboard Controller/Audio Interface For IOS, Mac, PC Image 4
IK Multimedia IRIG-STOMP-I/O IRig Stomp I/O USB Pedalboard Controller/Audio Interface For IOS, Mac, PC
No longer available at Full Compass
We've left this page up for reference only.

Questions? Contact our
Sales and Service Pros for expert
advice and package pricing.

800-356-5844

Email customer service

Accessories

Product Overview

The IK Multimedia iRig Stomp I/O is a USB pedalboard controller that integrates a professional, high-resolution, MFi certified audio interface with MIDI input/output for iPhone, iPad, Mac, and PC. It comes bundled with state-of-the-art guitar, vocal processing, and recording software for flexibility and usability, both live and in the studio.

Sturdy and robust, yet easily transportable, iRig Stomp I/O features four onboard metal stomp switches plus an expression pedal with a switch, all with LED indicators. To further extend its control possibilities, you can connect up to 2 additional switches or pedals. The MIDI IN/OUT ports make it possible to seamlessly control external processors when iRig Stomp I/O is used as a stand-alone MIDI foot controller, without any device or computer connected to it.

The Neutrik® 1/4" XLR combo jack accepts instruments and microphones including condenser mics with switchable 48V phantom power. The balanced stereo output connects to an external amp, mixer or PA, and a 1/4" stereo headphone output is available for silent monitoring. The input gain and volume output knobs are easily accessible on the front panel, each with its dedicated LED VU-Meter indicator, for the quick-and-easy setting of levels.

IK Multimedia iRig Stomp I/O Includes:

  • iRig Stomp I/O
  • Lightning to Mini-DIN connection cable (60cm/23.62")
  • USB A-Type to USB B-Type connection cable (2.5m/8.2ft)
  • DC power supply

IK Multimedia iRig Stomp I/O Features:

  • Four onboard switches, expression pedal with optical switch
  • 96kHz/24-bit built-in high-quality audio interface with input gain and volume control
  • Hi-Z/Mic/Line Neutrik® combo input, balanced stereo, and headphone output
  • Class A preamp with +48V phantom power for condenser microphones
  • In/out LED bar VU-Meters
  • MIDI in/out with two additional 1/4" switch/pedal controller inputs
  • Integrated device bay for easy positioning of iPhone, iPad or Microsoft Surface
  • Over $800 of included software and apps: AmpliTube 4 Deluxe, T-RackS processors (White 2A, Black 76, VC-670, EQP-1A, Mic Room) and Ableton® Live 9 Lite™ for Mac/PC, AmpliTube and AmpliTube Acoustic for iOS, VocaLive iOS and Mic Room for iOS
  • Seamless, plug and play integration with AmpliTube (iOS/Mac/PC) and VocaLive (iOS)
  • When used with iPhone and iPad it charges your device while you play
  • Can also work as a standalone MIDI foot controller, without a device or computer
  • Road-ready, rugged metal construction - can be carried anywhere
  • Ideal for both studio and live use
  • Optimal for guitar and bass players, singers, and vocalists
  • Includes Mini-DIN/Lightning and USB cable
  • Powered via USB or DC Adaptor
  • Designed and made in Italy

IK Multimedia iRig Stomp I/O Specifications:

  • Conversion: 24-bit A/D, 24-bit D/A
  • Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
  • Power: USB bus powered (when used with a computer) or DC IN
  • Device Connection: USB B-Type and Mini-DIN
  • Enclosure: metal sheet
  • Microphone Input:
    • Connector: balanced female 3-pin XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
    • Microphone Input Level: from 6 mVpp to 1.4 Vpp
    • Microphone Input Impedance: 3.2 kOhms
    • Gain Range: 46 dB
    • Phantom Power: +48V ± 4V
    • Frequency Response: 20 Hz – 20kHz +/-1.5dB
    • Input Noise: -100 dB RMS
  • Instrument Input:
    • Connector: unbalanced, Hi-Z, TS 1/4" Jack. Tip: signal / Shield: ground
    • Instrument Input Level: from 30mVpp to 6.9Vpp
    • Instrument Input Impedance: 1MOhms
    • Gain Range: approx 27dB
    • Frequency response: 20 Hz – 20kHz +/-1.5dB
    • Input Noise: -100 dB RMS
  • Stereo Headphone Output:
    • Connector: 1/4" TRS Jack. Tip: right / Ring: left / Shield: ground
    • Headphone Level control: potentiometer
    • Headphone Output Power: 100mW into 50Ohms
  • Stereo Line Output:
    • Connector: 2x balanced female 1/4" TRS Jack. Tip: hot / Ring: cold / Shield: ground
    • Maximum Output Level: +13 dBu into 600 Ohms balanced load
    • Frequency Response: from 10 Hz to 21 kHz (+/- 0.2dB)
    • Output Dynamic Range: 102 dB(A)
    • Output Impedance: 150 Ohms balanced
    • Floating Balanced Outputs
  • MIDI Input/Output:
    • Connector: 2x 5-pin DIN
  • Connections and Controls:
    • Top Panel:
      • Four metal foot-switches with one indication LED each, dual color
      • Two analog potentiometers for Input GAIN and output VOLUME
      • "Stomp MODE" LED
      • "Phantom 48V" LED
      • "PEDAL" LED
      • 4 segments mono input level meter (peak)
      • 4 segments device output meter (peak)
      • Continuous pedal (expression pedal) with virtual switch at the top of its travel
    • Rear Panel:
    • Neutrik Combo socket for MIC input and Instrument input (auto selecting)
    • +48V phantom power switch
    • 1/4" headphones output
    • 2 x 1/4" TRS Balanced floating line outputs
    • MIDI I/O 5-pin DIN connectors
    • 2 x 1/4" TRS External controllers sockets
    • B-Type USB socket for connecting a computer (Mac/PC)
    • Mini-DIN "iOS" connector for connecting an iOS device
    • Barrel DC-in socket for powering up the Stomp I/O and charging the iOS device at the same time
  • Dimensions: 16.3" x 8.5" x 2.83" (41.5 x 21 x 7.2cm)
  • Weight: 7.1 lbs (3.2 kg)

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.