Leviton PE400-10W 120V 1000W/VA Power Extender Electronic Low Voltage Load Type

Leviton’s PE400-10W Power Extender emulates the characteristics of the dimmer that it is connected to in terms of dimming range and resolution allowing it to work with electronic low voltage and incandescent fixtures. This dimmers power handling capacity can be extended to a full 1000W/VA on 120V input power. This allows a dimmer to dim or switch a fully loaded circuit of electronic low voltage and incandescent loads only and the PE400 Power Extender is compatible with any Dimensions® Multi-Zone Controller/Dimmer to extend load capacity for electronic low voltage loads on any zone.

Leviton PE400-10W Features:

• Device Type: Power Extender
• Load Type: Electronic Low Voltage and Incandescent
• Load Rating: 1000W/VA
• Voltage: 120 Volt AC 50/60Hz
• Control Input: 120 Volt 50/60Hz
• Load Output: Phase Independent of Control Device
• Color: White
• Standards and Certifications: UL/CSA
• Warranty: 2-Year Limited
• NOTE: If dimmer has a Neutral wire it must be connected.

Leviton PE400-10W Specifications:

• Electrical:
  • Input Voltage: 120V, 50/60 Hz
  • Load Rating: 500VA LED, 1000W/VA Incandescent
  • Load Output Power: Phase independent of control device
  • Dimmer Input: 120V 50/60 Hz
• Environmental:
  • Operating Temperature Range: 32-104°F (0-40°C)
  • Storage Temperature Range: 14-185°F (-10-85°C)
  • Relative Humidity: 20-90% non-condensing
• Physical:
  • Size: 4.72”L x 4.5”W x 0.5”H (120mm x 114mm x 12.7mm)
  • Color: Aluminium clear anodized extruded heat sink with snap-on molded white cover
• Other:
  • Listings: UL listed CSA certified, FCC Part 15
  • Warranty: Limited 2-year warranty