Dynacord C3600FDi Install DSP Power Amplifier with FIR Drive Phoenix Connectors, 2x1800W

The Dynacord C3600FDi is a DSP power amplifier 2x1800W.

Features

• Installation DSP amplifier, Euroblock connectors
• Fully integrated professional speaker processing with FIR Drive technology
• Market leading acoustic performance and rock solid reliability
• Low Z and 70/100V operation and power saving standby mode
• Intuitive system control software, makes setup and control easy

Specifications

• Load Impedance: 2O / 2.7O / 4O / 8O
• Maximum Output Power, SIngle Channel: 2O: 3200W; 2.7O: 2700W; 4O: 1800W; 8O: 950W
• Maximum Output Power, Dual Channel: Load Impedance: 2O=3000W; 2.7O=2500W; 4O=1700W; 8O=900W; High Impedance: 70 V Operation=2 x 1250 W; 100 V Operation=2 x 2500 W
• Maximum Output Power, Bridged Load Impedance: 4O=6000 W; 8O=3400 W; High Impedance: Not Recommended
• Maximum RMS Voltage Swing, THD = 1%, 1 kHz: 90.6V
• Voltage Gain ref.1 kHz: 32.0 dB
• IMD-SMPTE, 60 Hz, 7 kHz: < 0.1%
• DIM 30: < 0.05% (3.15 kHz, 15 kHz)
• Maximum Input Level: +21 dBu
• Crosstalk: < -80dB (ref. 1 kHz, at 100 W/4 O)
• Frequency Response: 10 Hz to 21 kHz (±1 dB)
• Input Impedance, active balanced: 20kO
• Signal-to-Noise Ratio (A-weighted): >109dB
• Output Noise , A-weighted: < -68dBu
• Output Stage Topology: Class H
• Power Requirement: 240 V, 230 V, 120 V or 100 V; 50Hz to 60 Hz (factory configured)
• Power Consumption: 850 W (Maximum Output Power @ 4O)
• Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
• Cooling: Front-to-rear, 3-stage-fans
• Safety Class: I
• Available Color: Black
• Height: 88mm (3.46")
• Width: 483mm (19.02")
• Depth: 462.4mm (18.2")
• Weight Net: 18.2kg (40.12 lbs)
• Signal Processing: FIR Filters, Audio Limiters Output delay per channel, 31 band GEQ per channel, PEQ per channel, Load impedance
• High Impedance Operation: 70V Operation & 100V Operation
• Mains Fuse: 240 V/230 V: T10AH; 120 V/100 V: T20AH
• Operating Temperature Range: +5°C to +40°C (40°F to+105°F)
• Total Harmonic Distortion: < 0.05% (at 1200 W/4 O MBW = 80 kHz, 1kHz)